User Manual

STEP 3 - Front Wheel Assembly

AB20049_G4

Fig. 1

1.Alignpivotshaftofstrollerframewithholein

wheelassembly.Wheellockinglevershouldbefacing

up.Slidewheelassemblyontopivotshaftuntilasolid

clickisheardandfeltfromthebuttonsengaging.

(Fig. 1)

2.Checkthewheelissecurebypullingdownonthe

wheels.Wheelsshouldstaysecurelyinplace.

STEP 4 - Arm Bar Assembly

1. WithFoundations

logoonArm Bar (E) facingup,

 slideArm Bar Clamp (1)betweenfabricseatsidecover

 andfrontleg.PushArm Bar Clamp (1) ontofrontleg

tubesbetweenthetwoArm Bar Stops (2) andalignthe

holeintheclampwiththeStud(3)onthearm, onboth

sidesofthestroller(Fig. 1).

2. LockArmBartostrollerframebypushingArm Bar

Clamp(1) aroundfrontlegtube(4).Close

theLockleverbypressingthelockleverontotheArm

baruntilitclicksclosedandthestud(3)isfullythrough

theholeinthelever.(Fig. 2).

3. Repeatstep2foroppositeendofArmBar

CheckthattheArmbarissecurelyattached.

Fig. 1

Fig. 2