Installation Guide

PRODUCT DESCRIPTION
BENEFITS/FEATURES
SUGGESTED APPLICATIONS
TECHNICAL INFORMATION
COVERAGE
SHELF LIFE
PACKAGING
The Armor WB15 is a water-based low gloss acrylic sealer designed to seal and protect porous concrete and concrete paver sur-
faces with a durable low gloss surface film. It can also be applied to uncured concrete to help aid with proper curing. The low
odor, water based formula makes it a fantastic choice for sealing interior and exterior surfaces.
Solids………………………………………………15%
Drying Time……………………………………….4-6 hours
Re-Coat Time…………...…………………………4-24 hours
Foot Traffic..............................................................24 hours
Wheel Traffic...........................................................24 - 48 hours
Application Temp....................................................55°F - 85°F
When properly sealed and stored, the shelf life of the Armor WB15 is up to 1 year.
The Armor WB15 is available in a 16 OZ Sample, 1 Gallon Bottle, 5 Gallon Pail, and 55 Gallon Drum.
Porous Surfaces: Up to 175 FT2/gallon in one coat.
Smooth Surfaces (once properly prepped): Up to 200-225 FT2/gallon in one coat.
Coverage will vary depending on porosity, surface condition, application method, and the amount of material applied by the applicator. The
above coverage rates are estimates and will vary. Two coats are suggested for even coverage and appearance.
Wet Appearance.......................................Milky White
Dry Appearance........................................Low gloss
VOC Content............................................<350 VOC
Armor WB15 Water Based Low gloss Acrylic Sealer
Foundation Armor
3 Howe Drive, Suite 2
Amherst, NH 03031
[phone]
FoundationArmor.com
For Professional Use
 Provides a long-lasting, non-yellowing low gloss finish
 Reduces deterioration caused by surface abrasion
 Reduces the formation of mold, mildew, and algae
 Reduces the formation of efflorescence
 Reduces surface stains
 Breathable
 Made from US manufactured non-recycled resins
 Will provide a lasting low gloss finish
 Low odor, water based
 Poured, broom finished, and stamped concrete
 Concrete pavers
 Driveways, walkways, and stairs
 Pool decks and patios
COMPLIANCES
 AASHTO Specification M-148, Type 1, Class A & B
 ASTM C-309, Type 1, Class A & B
 Corps of Engineers CRD-C304, Type 1, Class A & B
 Classified in Table 1.1, ACI Standard 302
 Dried Coating is USDA Accepted
 Meets OTC, CARB, LADCO & SCAQMD
VOC restrictions.