Installation Guide

PRODUCT DESCRIPTION
BENEFITS/FEATURES
RECOMMENDED APPLICATIONS
TECHNICAL INFORMATION
PRODUCT STORAGE
SHELF LIFE
PACKAGING
ARMOR UTN60
2K 60% Solids Solvent Based Aliphatic Urethane
ARMOR UTN60
EPOXIES, URETHANES, ETC.
ARMOR UTN60 is a two component aliphatic polyurethane coating with excellent abrasion resistance, chemical resistance, hot tire
resistance and UV Stability. ARMOR UTN60 is designed as a high performance topcoat for concrete flooring systems.
♦ Excellent long term wear capabilities
♦ Excellent chemical resistance
♦ Excellent resistance to stain
ARMOR UTN60 has been designed as a high performance topcoat for various concrete and seamless floor applications. It is an excel-
lent coating for auto service centers, warehouses, computer rooms, laboratories, aircraft hangars, cafeterias, exterior tanks and other
areas where high performance, abrasion resistance and chemical resistance are required.
Abrasion Resistance………………...………………........................35 mg loss
(Tabler Index, ASTM 4060-81, CS-17 Abrasion Wheel, 1000 gram load)
Gloss 60



 .............................................................................................90-95
Flexibility (1/8” Mandrel)....................................................................................Pass
Hardness - Shore D......................................................................................62
Water Resistance...............................................................................Excellent
Solids % Weight (Federal Spec. TTP-141B).............................................................60%
Density lbs/Ga. (Federal Spec. TTP-141B)...............................................................8.49
VOC …………………………………………………….……< 250 grams per liter
60% Aliphatic Urethane has a shelf life up to one year (12 months) in it’s original, sealed, unopened container.
60% Aliphatic Urethane is packaged in 3 gallon and 15 gallon kits.
Store product in an area so as to bring the material to room temperature within the recommended application temperature range before
applying. Long term storage should be between 60 and 90 degrees F.
Mix Ratio (a/b volume)..........................................................................................2 to 1
** 16.73# part A (2.0 gallon approximate) to 8.75# part B (1 gallons approximate)
Coverage (3-5 mils dft.)........................................................................250-340 sq. ft./ga
Viscosity.......................................................................................................400-600 cps
Pot Life.........................................................................................................1 - 1.5 hours
Dry Time-Set to Touch (50% R.H. @ 72

 F).............................................................4 - 6 hours
Dry Time-Recoat (50% R.H. @ 72

 F)..................................................................10 - 12 hours
Dry Time-Light Traffic (50% R.H. @ 72

 F)..................................................................24 hours
Dry Time-Full Cure (heavy traffic) (50% R.H. @ 72

 F)...............................................3 - 5days
Application temperature………………………………………….……...45-90 degrees F
PRODUCT CODE: UTN60
CHEMICAL RESISTANCE
Urine……………………………………………No Effect
Blood…………………………………………...No Effect
Brake Fluid……………………………………..No Effect
Xylene …………………………………………No Effect
Gasoline………………………………………...No Effect
Skydrol B-4……………………………………..No Effect
Ethylene Glycol………………………………...No Effect
MEK……………………………………….Film Softened
10% Sodium Hydroxide…………………………..No Effect
50% Sodium Hydroxide…………………………..No Effect
25% Sulfuric Acid………………………………...No Effect
25% Acetic Acid………………………………….No Effect
20% Nitric Acid…………………………………..No Effect
10% Hydrochloric Acid…………………………..No Effect
•• A chemical exposure test should always be performed
prior to application to ensure satisfactory resistance.
FOUNDATION ARMOR
3 Bud Way STE 27, Nashua, NH 03063
Phone: [phone]
Visit us online at: www.FoundationArmor.com
UPC: 856994005084