MSDS
Armor S2000
Revision Date 30-May-2015
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Page 4 / 7
Skin and body protection
Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls,
as appropriate, to prevent skin contact. Wear chemical resistant gloves at minimum. Wash
skin immediately upon contact. Wash hands at mealtime and end of shift.
Respiratory protection
Use respiratory protection unless adequate local exhaust ventilation is provided or
exposure assessment demonstrates that exposures are within recommended exposure
guidelines. Where concentrations are above recommended limits or are unknown,
appropriate respiratory protection should be worn. Follow OSHA respirator regulations (29
CFR 1910.134) and use NIOSH/MSHA approved respirators.
General Hygiene Considerations
Handle in accordance with good industrial hygiene and safety practice. Wash hands before
and after breaks and at the end of the work day.
9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
Physical state
liquid
Appearance
Transparent Liquid
Odor
Mild
Color
Transparent Liquid
Odor threshold
No data available
Property
Values
Remarks • Method
pH
11.5-12
Melting point / freezing point
Not Applicable/ 32° F
Boiling point / boiling range
100 °C
Flash point
Not Applicable
CC (closed cup)
Evaporation rate
Not Available
Flammability (solid, gas)
Not Relevant
Flammability Limit in Air
Upper flammability limit:
Not Available
Lower flammability limit:
Not Available
Vapor pressure
Not Available
Vapor density
Not Available
Relative density
1.15
Water solubility
Soluble in water
Solubility in other solvents
Not Available
Partition coefficient
Not Available
Autoignition temperature
Not Available
Decomposition temperature
Not Available
Kinematic viscosity
Not Available
Dynamic viscosity
Not Available
Explosive properties
Not Available
Oxidizing properties
Not Available
Other Information
Softening point
Not Relevant
Molecular weight
Not Available
VOC Content (%)
Not Applicable
Density
Not Available
Bulk density
Not Available
10. STABILITY AND REACTIVITY
Reactivity
Not Available
Chemical stability
Stable.
Possibility of Hazardous Reactions







