Installation Guide

PRODUCT DESCRIPTION
BENEFITS/FEATURES
RECOMMENDED APPLICATIONS
TECHNICAL INFORMATION
PRODUCT STORAGE
SHELF LIFE
PACKAGING
Armor epoxy
2K Water Based Epoxy (Low Odor)
ARMOR EPOXY
EPOXIES, URETHANES, ETC.
Armor Epoxy is a specially formulated, low odor, two component, water based epoxy primer for interior use. This product provides
excellent substrate penetration and is a suitable primer for most epoxies, urethanes, polyureas and polyaspartic polyureas.
♦ Excellent substrate wetting and penetration
♦ Superior adhesion strength for a bond coat
♦ Fast cure system with reduced recoat times
♦ Low Odor
Armor Epoxy is recommended for priming properly prepared concrete or masonry surfaces in commercial, retail, and high traffic areas.
Excellent for wall and floor coatings, institutional coatings and heavy duty maintenance coatings.
Abrasion Resistance………………...………………...................54 - 65 mg loss
(Tabler Index, ASTM 4060-81, CS-17 Abrasion Wheel, 1000 gram load)
Gloss 60….. ..................................................................................................86
Flexibility (1/8” Mandrel)....................................................................................Pass
Pencil Hardness (7 days).....................................................................................F
Water Resistance...............................................................................Excellent
Solids % Weight (Federal Spec. TTP-141B).............................................................40%
Density lbs/Ga. (Federal Spec. TTP-141B)...............................................................8.54
VOC …………………………………………………………...< 20 grams per liter
Armor Epoxy has a shelf life of at least one year in it’s original, sealed, unopened container.
Armor Epoxy is packaged in 2 gallon and 10 gallon kits.
Store product in an area so as to bring the material to room temperature within the recommended application temperature range before
applying. Long term storage should be between 60 and 90 degrees F. Keep from freezing.
Mix Ratio (a/b volume)..........................................................................................1 to 1
** 9.07# part A (1.0 gallon approximate) to 8.54# part B (1 gallons approximate)
Coverage (2-3 mils dft.).......................................................................200-300 sq. ft./ga
Viscosity.....................................................................................................200 - 350 cps
Pot Life........................................................................................................1 - 1.5 hours
Dry Time-Set to Touch (50% R.H. @ 72

 F)....................................................20 - 40 minutes
Dry Time-Recoat (50% R.H. @ 72

 F).......................................................................4-6 hours
Dry Time-Light Traffic (50% R.H. @ 72

 F).............................................................6 -12 hours
Dry Time-Full Cure (heavy traffic) (50% R.H. @ 72

 F).............................................2 - 5days
Application temperature……….55-90 degrees F with relative humidity below 75%
PRODUCT CODE: EPOXY2GAL
CHEMICAL RESISTANCE
Chemical spot resistance 1 hour and 18 hour exposure
1 h 18 h
Toluene + +
Ethanol + +
Sulfuric Acid (10%) + +
Acetic Acid (3%) + +
Acetic Acid (10%) H/B B
+ = no change; H = haze; B = blisters
Food stain resistance 18 hour exposure
18 h
Coffee no change
Ketchup no change
Mustard no change
Red Wine slight stain
FOUNDATION ARMOR
3 Bud Way STE 27 Nashua NH 03063
Phone: [phone]
Visit us online at: www.FoundationArmor.com
UPC: 856994005183