8288681100 VF-16 Owner’s Manual Save/Load using CD-RW The VF-16 software has been upgraded to Version 2.0 which allows save/load of song data using a CD-RW drive. This supplementary manual only describes the operations and notes regarding the save/load functions of song data using a CD-RW drive. See "Chapter 6 Save/Load of song data" on the main manual about details for save/load using SCSI, S/P DIF and adat.
Please read this first! Check by either of the following methods the model number and manufacturer of CD-R/RW drives which we confirmed the SAVE/LOAD operation of song data. With a CD-R/RW drive other than we confirmed the operation, SAVE/LOAD of song data cannot be properly executed. Confirm the model number and manufacturer of operation-confirmed CD-R/RW drive by accessing the following URL.
Save/load of Song Data Using a CD-RW drive Unlike save/load using other SCSI devices (zip, MO, etc.), save/load using a CD-RW drive is took place as illustrated below. Read the following description together with the description on page 80 in the main manual. • Save You can only a single selected program data to a disc regardless of the program data amount. You cannot save more than one program data even if there are enough disc space.
Saving data using a CD-RW drive In the following procedure, we assume that a CDRW drive is connected to the VF-16 SCSI port and a non-recorded CD-RW disc is used. Do not carry out any VF-16 key operation until the access process to the CD-RW disk is completed. 1. After turning on both the VF-16 and the CD-RW drive connected, insert a disc to the CD-RW drive. 5. After selecting a program, press the [ENTER/YES] key. The display shows a screen as below. 2.
If you save data to more than one disc, we recommend to put a number on each disc in the saving order (such as DISC-1, DISC-2, etc.) so that you will easily know the order for inserting discs when loading data. You cannot abort the save operation before completed.
If you try to save data to a recorded CD-R disc, the display shows a warning message saying "Not Writable!", followed by a message saying "Insert Disk" as below. Loading data from a CD-RW drive In the following procedure, we assume that a CDRW drive is connected to the VF-16 SCSI port and a CD-RW disc to which data has been saved is prepared. Do not carry out any VF-16 key operation until the access process to the CD-RW disc is completed. 1.
When you load song data which is saved to more than one disc, the display also shows the disc number currently set. The example below shows DISC-1 is set. If there is not enough available space for loading on the current drive, the display shows "Disk Full!" and the display returns to the previous screen. When completing the load operation, "Load Completed!" appears on the display (as shown below) and the VF-16 stops access to the drive, while the disc in the CD-RW drive is automatically ejected.
FOSTEX CORPORATION 3-2-35 Musashino, Akishima-shi, Tokyo, Japan 196-0021 FOSTEX AMERICA 15431 Blackburn Ave., Norwalk, CA 90650, U. S. A. © PRINTED IN JAPAN JAN.
