User Manual

3
Personal Active Speaker System
VOLUME
INPUT
L-OUT
SERIAL No.
MADE IN CHINA
DC IN
OFF
R L
MAX.
12V 1.5A
PM0.1
INPUT
R L
N2215
CONFORMS TO
ANSI/UL STD.
60065
CERTIFIED TO
CAN/CSA STD.
C22.2 NO. 60065
Active speaker (R channel)
Equipped with a stereo power amplier, and
plays the right channel of the input signal.
 VOLUME knob
Switches on/o the unit and adjusts the
volume.

[INPUT] terminal (L/R)
Connect to the analog output terminal of
an audio player using the supplied RCA pin
cable.

[L-OUT] terminal
Connect to the [L-IN] terminal of the
passive speaker using the supplied speaker
cable. The left channel of the input signal
from the [INPUT] terminal is transmitted
to the passive speaker through the built-in
amplier.

[DC IN] terminal
Connect the supplied AC adapter.
Passive speaker (L channel)
Not equipped with a stereo power amplier,
and plays the left channel of the input signal
when connected to the active speaker using
the supplied speaker cable.
[
L-IN] terminal
Connect to the [L-OUT] terminal of the
active speaker (R channel) using the
supplied speaker cable.
* Auto standby function
The auto standby function is activated when the
input signal stops for about 15 minutes, and power
consumption is reduced to below 0.5 W. The power
indicator lights in red while the function is working.
The power indicator lights in white and playback starts
when the input signal is received again. This function
may not work properly depending on the noise level
of the input signal.





Headphone output or line
output of your computer
Audio cable
(supplied)
Speaker cable (supplied)
AC adapter (supplied)
Active speaker Passive speaker
Headphone output of
your portable audio
player
To AC outlet
 Functions and connections
This unit consists of an active speaker (R channel) that has a built-in stereo power amplier and
a passive speaker (L channel) that does not have an amplier.
• The power must be o when you make connections.