Datasheet

107

Code

8407 103

Code

8407 102

Code

8407 100

Code

8407 000

Automatic waste fitting

Premium waste fitting with cubic remote

control (push-pull) and with overflow

Premium waste fitting with squared

remote control and with overflow

Waste fitting with round remote

control and with overflow

Waste fitting with round remote

control and without overflow

Complements

Automatic drains are compatible with sinks that are

supplied with at least one second hole (in addition

to the tap hole).

For many sinks this is not a standard feature

but it can be requested when ordering it. In the

sinks drawings standard holes are shown with a

continuous line, while positions for any holes on

request are shown with a dashed line (see example

aside).

For undermount sinks the possibility of insertion of

the automatic drain is always shown because the

hole can be positioned on the worktop.

The automatic drains presented on this page are all

interchangeable.

In the sinks already equipped with automatic drain,

where not expressly stated otherwise, the PR drain

(code 8407 100) is meant.

The SPACE automatic drain (see p. 106) is not

interchangeable with others, because of the

different geometry of the overflow, as specified in

the sinks series requiring this drain type.

Notes on compatibility of automatic drains

Second and third tap hole available

Undermount

Sinks