Datasheet

85
bordo vasca con risvolto
bordo vasca piatto
Worktop drilling
The drawing with instruction to drill the worktop properly is included in the
packing.
The holes’ dimension is to be considered merely as the manufacturer’s
suggestion. Small adjustments can be adopted on the basis of need or
preference of the user, as per the attached schemes.
Notice:
the compatibility of the accessories is assured only if the manufacturer’s drilling
instructions are respected.
Installation procedure with nut, bolt and
bracket for bowls with folded edge.
All models are supplied with installation kit (nut, bolt and bracket). The alternative use of different screws or bolts is left to the discretion of the installer.
Installation procedure with nut, bolt
and bracket for bowls with flat edge.
Installation procedure with nut and
bolt for bowls with edge provided with
fixing holes (Quadra series).
Cabinets
The cabinets’ specifications shown for each model are referred only to the
bowls’ overall dimensions, and do not take into account the fixing systems.
Different overall dimensions correspond to different installation methods.
Moreover, these are negligible if kept within the thickness of the worktop, by
creating a proper nook.
It is therefore recommended to check beforehand for possible interferences.
Foster offers its assistance for drilling the worktop properly with dwg drawings,
now available for downloading on our website www.fosterspa.com on the
product specifications page.
Notice for installation
Drilling at bowl’s edge
Negative drilling
(invisible edge)
Positive drilling
(visible steel edge)
Standard fitting
Installation with
recess on the basin
Installation with
recess on the
worktop
Undermount
Sinks