Datasheet

25
67'
4
6)
)7
FT
67
)7
FT
6)
Flush-mount
The product is sunk in 1,5 mm deep
recess thus beeing perfectly flush with
the worktop. As alternative, it can be
installed on the worktop as well.
Flush-mount & Flat-edge: a clarification to be done
Many manufacturers indicate as Flat-edge a Flush-mount edge mounted on the
worktop.
For Foster Flat-edge means a real alternative built-in solution with an elegant 3 mm
sloping edge.
In any case, Foster's Flush-mount models can be mounted on the worktop (as in
the detail in the picture), thus offering a further built-in solution.
Undermount
A classy and contemporary idea, to be
installed under the worktop; available
in various types of sinks, with soft or
square design.
Built-in
The most stylish and assertively
professional solution is to weld the sink
to the stainless steel worktop, producing
one sleek, seamless block.
Standard
Traditional built-in with the vertical, 8-mm
edge.
Q4
The casing has a square edge that
stands on the work surface by just 4 mm.
Great solution to match the sink with the
ceramic glass hobs (Induction).
Flat-edge
An original edge, with an inclined, 3
mm high profile, matching an extreme
elegance with the easiness of installation.
The methods with which worktops can be built-in have become increasingly more varied and customized. Foster was the first
sink manufacturer to have researched and used the new recessing methods and has thus acquired a great deal of experience.
It now offers the most comprehensive range available on the market, with flush-mount, flat-edge and undermount installation.
Built-in and beyond
Sinks