Datasheet

37
726
764
A G L4
67'
6)
)7
Types of installation
Many Foster sinks are available in a variety o versions
(Standard, Flush-mount, Flat-edge and Undermount)
that can have slightly different dimensions. Therefore we
reccomend to check the specifications besides every
version. The built-in type to which figures are referred is
always specified under the drawing.
Accessories
Always striving to blend aesthetics and functionality,
Foster devotes special attention to its products’
Accessories. This catalogue places special emphasis
on the optional features indicated below each model, to
facilitate identification of the proper combinations.
Mixer tap holes
In the drawings standard tap holes are shown with
continuous line. Further possible holes on request,
in order to install the automatic waste fitting and the
dispenser, are shown with a dashed line. For some
models, customization with additional holes can be done
with some extra costs.
How to read the catalogue (sinks chapter)
Cabinet
“Cabinet” refers to the smallest standard element of a
modular kitchen in which a sink can be fitted in.
In some cases you may find a double standard:
(ß) for fitting in top at least 40 mm thick, consider the smaller
measure, as indicated in parentheses (e.g. page 43);
(T) for fitting in the beginning/end of composition, consider
the bigger measure, as indicated in parentheses.
For special fittings that require extra adaptations to the
furniture, please refer to the kitchen manufacturer.
Chopping board
34x40
8647 000
Chopping board
40x40
8646 000
Glass chopping board
23x41 cm
8631 300
Features Version Code Technical Drawing
Cabinet 90
Accessories:
A G L4 N2 N3 O2 P2 R S T2
β1
For Standard and Flat-edge version only:
L5 M
finish: brushed
dimensions: 1160x500
2b: 400x400+340x400
cut-out: 1140x480
drain: 3½”
1312 061 dx
1312 062 sx
External dimensions refer to
standard version
Packing: 1240x560x250 mm 11,5 kg
finish: brushed
dimensions: 1173x513
2b: 400x400+340x400
cut-out: 1140x480
drain: 3½”
1318 061 dx
1318 062 sx
finish: brushed
dimensions: 1173x513
2b: 400x400+340x400
cut-out: see packaging
drain: 3½”
1315 061 dx
1315 062 sx
Accessories
Cabinet 80 cm
Right-hand, left-hand and reversible sinks
The double code for a single model indicates that both
right-hand and left-hand versions are available. The
right-hand version (dx) refers to a sink with the bowl (or
bigger bowl on models without drainer) on the right. Left-
hand versions are identified by the code “sx”. The single
code indicates that the sink is reversible, or that only
the version shown in the picture or drawing is available.
Sinks