User Manual
3
Input Power Knob
6
Cooling Suction/Exhaust Port
7
Display the product's battery level and usage status tips.
LCD Screen
5
DC ON/OFF Button
4
DC output
Cigarette port
AC Switch (AC output port, the sum of electrical load power should be <2400W)
8
12V/10A 12V/25A
When the product is connected to the AC mains for charging, the power can
be adjusted according to the actual input voltage.The clockwise rotation
increases the input power, and the counter clockwise rotation decreases the
input power. It is worth noting that charging this product at low power is
beneficial for extending battery life.
When the product reaches the temperature threshold set by the system, the
cooling fan will automatically run, accompanied by a certain fan noise (fan
noise below 60dB is normal). Do not block the cooling suction/exhaust port
during use of this product, and do not place any object within the range of
30CM.
Tap the AC button to enable the AC output function.
Notices:
1. Since there may be differences in the AC output frequency in different regions,
please check the AC voltage and frequency of the device before use.
2. Press and hold the AC button for 2 seconds to enter the frequency switching mode,
the 50Hz or 60Hz icon will flash on the display. Short press the AC button again to
select 50Hz or 60Hz; when the icon stops flashing and displays 50Hz or 60Hz, it
indicates the switch is successful.
3. Short press the AC button 10 times in quick succession in the United States and
Japan to switch the AC output voltage to 100V or 110V.
4. Short press the AC button 10 times in quick succession in China, United Kingdom,
Europe and Korea regulations to switch the AC output voltage to 220V or 230V.
Instructions: Short press the DC button to turn on the DC output port, and short
press it again to turn it off.