SDS

FOSS® Manufacturing Company, LLC.
Safety Data Sheet
Section I - Identification
Manufacturer's Name Emergency Telephone Number
FOSS MANUFACTURING COMPANY, LLC. [phone]
Address (Number, Street, State and Zip Code)
Telephone Number for Information
11 Merrill Industrial Drive [phone]
Date Prepared
HAMPTON, NH 03842 03/23/16
Preparer
A.Plue
Section II - Hazards
None per CFR 1910.1200
Section III - Components
CAS # OSHA PEL ACGIH TLV Others
Recycled Polyester (PET) 25038-59-9 NA NA NA
PET Binder Fiber 25038-59-9 NA NA NA
Miscellaneous Pigments and Additives NA NA NA NA
Section IV - First Aid
Flush eyes with water for at least 10 minutes. Contact with molten material should be treated as a
thermal burn. Seek medical attention for all burns, particularly if in the facial area.
Section V - Fire Fighting Measures
Extinguishing Media
Water fog, foam dry (ABC)
Special Fire Fighting Procedures
Use full bunker gear including NIOSH approved breathing apparatus
Unusual Fire and/or Explosion Hazards
Treat as a solid that burns generally with low smoke density
Section V I- Accidental Release Measures
Steps to Be Taken in Case Material Is Released or Spilled
Shovel, sweep or vacuum. Avoid generating dust clouds.
Waste Disposal Method
Place in an appropriate container and dispose of in compliance with all federal, state and local
ordinances.
This material is an "Article" and is considered non-hazardous by OSHA
Hazard Communication Standard 29 CFR 1910.1200
TEE TIME
1 QA0007 Rev D 01/03/2013