Product Info
Table Of Contents
- 1 Safety
- 2 Introduction
- 3 Installation
- 4 Operating Instructions
- 4.1 Start-up
- 4.2 Analysis Procedure
- 4.3 Care - Default Features
- 4.4 Care View - Advanced Settings
- 4.4.1 Instrument Diagnostics
- 4.4.2 Advanced Diagnostics
- 4.4.3 Instrument Information
- 4.4.4 User Manual
- 4.4.5 FossConnect Synchronisation
- 4.4.6 Settings
- 4.4.7 Local Configurator
- 4.4.8 Data Maintenance
- 4.4.9 Instrument Calibration
- 4.4.10 Remote Support
- 4.4.11 Export Logs
- 4.4.12 Change PIN Code
- 4.4.13 Manual Sample Transfer
- 4.4.14 Lamp Change
- 4.4.15 Automate Sample Transfer
- 4.4.16 Help
- 4.5 Check Samples
- 4.6 Instrument Calibration
- 5 Maintenance
- 6 Troubleshooting
- 7 Parts, Accessories and Consumables
- 8 Technical Specifications
The equipment is CE labelled and complies with the following directives:
• EMC (ElectroMagnetic Compatibility) Directive 2014/30/EU
• LVD (Low Voltage Directive) 2014/35/EU
• Packing and Waste Directive 94/62/EC
• RoHS Directive 2011/65/EU
• WEEE Directive 2012/19/EU
• REACH Directive 1907/2006/EC
• FCC ID: 2AZ6MNIRSDS3
The instrument is only compliant if no changes or modifications are made to the
device.
NIRS DS3 / DS3 F is compliant with the requirement for RF exposure in US with
<50 mm separation distance between the user and/or bystander of the device.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.