Product Info
Table Of Contents
- 1 Safety
- 2 Introduction
- 3 Installation
- 4 Operating Instructions
- 4.1 Start-up
- 4.2 Analysis Procedure
- 4.3 Care - Default Features
- 4.4 Care View - Advanced Settings
- 4.4.1 Instrument Diagnostics
- 4.4.2 Advanced Diagnostics
- 4.4.3 Instrument Information
- 4.4.4 User Manual
- 4.4.5 FossConnect Synchronisation
- 4.4.6 Settings
- 4.4.7 Local Configurator
- 4.4.8 Data Maintenance
- 4.4.9 Instrument Calibration
- 4.4.10 Remote Support
- 4.4.11 Export Logs
- 4.4.12 Change PIN Code
- 4.4.13 Manual Sample Transfer
- 4.4.14 Lamp Change
- 4.4.15 Automate Sample Transfer
- 4.4.16 Help
- 4.5 Check Samples
- 4.6 Instrument Calibration
- 5 Maintenance
- 6 Troubleshooting
- 7 Parts, Accessories and Consumables
- 8 Technical Specifications
For the Instrument Calibration the ISIscan Nova software requires a specific
product to be configured. In Local Configurator this product is installed by default
from installation, and in FossManager Network this product is set up by the
administrator. If this product is not set up correctly you will receive this message:
Fig. 82
Please verify that the standardisation product is set up correctly in FossManager (or
contact your network administrator).
Click the Remote Support button to get remote support and start a TeamViewer
session. Make sure that you have contact with a FOSS service engineer before
doing this. An internet connection is required.
Fig. 83
Fig. 84
A command for collecting internal log files from ISIscan Nova and Local
Configurator.