Product Info
Table Of Contents
- 1 Safety
- 2 Introduction
- 3 Installation
- 4 Operating Instructions
- 4.1 Start-up
- 4.2 Analysis Procedure
- 4.3 Care - Default Features
- 4.4 Care View - Advanced Settings
- 4.4.1 Instrument Diagnostics
- 4.4.2 Advanced Diagnostics
- 4.4.3 Instrument Information
- 4.4.4 User Manual
- 4.4.5 FossConnect Synchronisation
- 4.4.6 Settings
- 4.4.7 Local Configurator
- 4.4.8 Data Maintenance
- 4.4.9 Instrument Calibration
- 4.4.10 Remote Support
- 4.4.11 Export Logs
- 4.4.12 Change PIN Code
- 4.4.13 Manual Sample Transfer
- 4.4.14 Lamp Change
- 4.4.15 Automate Sample Transfer
- 4.4.16 Help
- 4.5 Check Samples
- 4.6 Instrument Calibration
- 5 Maintenance
- 6 Troubleshooting
- 7 Parts, Accessories and Consumables
- 8 Technical Specifications
frequently a reboot is needed depends on the PC, but leaving it on for months is not
recommended.)
The instrument and ISIscan Nova software are turned on and off separately.
Shutting down the software will not turn off the instrument or the lamp inside it.
To turn off the analyser:
1. Go to the Care view.
2. Click Close application.
3. Click OK to shut down the software.
4. The power to the instrument and the lamp will still be on. To completely turn
off the instrument, shut off the power with the on/off switch on the rear panel.
The Care view contains features not related to routine analysis. By default, five
buttons are visible.
Fig. 33 Care menu - default features
Fig. 34
Running Instrument Diagnostics will carry out the same tests and with the same
test limits as during the start-up test. The outcome of the Instrument Diagnostics
will be displayed as passed or failed on the screen.