User's Manual

INSTRUCTIONS FOR USAGE:
1. Put the machine on a flat surface.
2. Fill the water into the water tank, and then tighten the tank
cover.
3. Put the water tank on the main base.
4. Check if the rated voltage meets the input voltage, and
plug into the socket. Then display shows the symbol
POWER
5. Touch the symbol POWER on the machine, the
background LED light will be on. The machine will begin
to work in AUTO mode. Display shows AUTO symbol
and current humidity, temperature. After 15 seconds
without any operation, the display will become dim, press
any key except power key to wake up the display.
In Auto mode, the device determines the optimal humidity
by the formula and starts to achieve it at maximum power.
When the current humidity less than the table
showed humidity, it is in high speed operation.
When the humidity arrived, the machine will be in
low speed operation.
Temperatureof theair,
degreesCelsius
Humidity,%
≤19 65
20 60
21 58
22 57
23 55
24 53
25 50
26 48
27 45
28 43
29 40
30 38
31 36
32 35
33 34
34 32
35 31
36 30
37 and higher 25