User's Manual

Table Of Contents

Operating Steps

5. Touch the symbol POWER “ ” on the machine; the background LED light will be on. The machine will begin to

work in AUTO mode. Display shows AUTO symbol. After 15 seconds without any operation, the display will become

dim, press any key except power key to wake up the display.

6. Touch the symbol ANION “ ” the anion generator works. On the LED display, it shows the shape of anion “ ” .

Touch again to stop the function.

7. Touch the symbol HEATING “ ” the warm mist will come out after 10~15 minutes. On the LED display, it shows

the same symbol “ ” . Touch again to stop the function. Mist will become cool.

9. Touch the symbol MODE “ ” , baby mode will be turn on (keep constant humidity at 55% with warm mist and

plasma turn on). In baby mode,mist output speed cannot be set. Press symbol MODE “ ” again to enter auto

mode. Press MODE “ ” for two seconds to enter sleep mode. In sleep mode, display and water tank indication

light will turn oﬀ and “ ” will be turn on. Humidiﬁer will keep running. Touch any button to cancel sleep mode and

display will turn on.

11. Auto Shut-Oﬀ: Once the water in the basin is too little to keep the machine working, the machine will

automatically stop working. LED shows the shape of lack of water “ ” . Reﬁll the water, and the machine will

restart. If don’t reﬁll water within 15 minutes, the machine will automatically power oﬀ.

10. Timer setting: There are 12 timer setting: 1,2,3,4,5,6,7,8,9,10,11,12 hours. Touch the symbol TIMER “ ” , the

LED display will show the desired setting timer. Touch till “Co” display on the LED, timer setting is cancelled. The

timer shows the rest operation time and decreases by 1 hours, i.e., if the timer is set at 12 hours, LED display shows

11 after one hour. To know what time have been set, just to touch TIMER symbol. Touch again, to set timer again.

8. Constant humidity: Before you touch the symbol HUMIDITY “ ” , LED display shows the current humidity. You

may set the humidity arranged from 30%RH to 75%RH. Touch once, AUTO mode is cancelled, it will increase by

5%RH. When it reaches 75%RH, touch again, it will show “Co” and ﬂash for 3 seconds to exit humidity setting

function. After you set the expected humidity, the machine will keep the memory and conﬁrm after 5 seconds. 5

seconds later, the symbol %RH will blink and LED display shows the current humidity. Touch again, it shows the

expected humidity setting. If the expected humidity is less than the current humidity, the machine will be in sleeping

state. But if the expected humidity is 3% higher than the current humidity, the humidify function will work. Mist

output speed cannot be set during the constant humidity mode. Long-press the symbol “ ” or “ ” , to cancel

auto humidity, but enter to AUTO mode.

Temperature of the

air, degrees Celsius

≤19

≥37

55Humidity(%)