Owner's Manual

Dirty water or water sitting too long.
Clean water tank, fill with clear water.
Residual smell from diffusing aroma
oil on the aroma cotton.
Remove the aroma cotton, rinse it
under clean water and allow it to dry.
Humidifier makes a loud or unusual
sound
Resonant in water tank when water is
too low.
Fill water into water tank.
Humidifier is on an unstable surface.
Move the humidifier to a stable flat
surface.
Water tank is positioned incorrectly.
Turn off and unplug the humidifier,
then align the water tank cover with its
respective opening in the inner
chamber.
Humidifier is malfunctioning.
Immediately discontinue use and
contact Customer Support.
The humidification capacity is too low
There is natural or artificial air
replacement in the room which
interfere the increase of %RH.
Check if doors and windows are
closed.
Check if there is no air conditioning
working in the room.
The air inlet grids and nozzle could be
blocked.
Remove any blocking items from the
grids and the nozzle.
Too much scale in the water basin.
Clean transducer.
The humidity selected rate is too low.
Increase mist output speed.
Increase humidity setting rate.
Water is too dirty or water kept too
long in the tank.
Clean water tank, change to fresh clear
water.
The ambient humidity is too high
Humidifier is working in
CONTINUOUS MODE.
Cancel the mode.
The humidity target is too high.
Select a lower %RH target.
Room is not well-ventilated.
Open a window to ensure proper air
flow for your humidifier, or move the
humidifier to a more well-ventilated
room.
Excess water tank has spilled while
filling the water tank or replacing the
water tank back onto the base.
Wipe off excess water from the top and
bottom of the base before replacing the
water tank.
There is condensation in the room
The room temperature is too low.
Heat the room up.
The mist suddenly stops coming out
Programmed timer period has run out.
Turn humidifier on.
The water shortage indicator is on.
Refill water tank.
The target humidity level is reached.
Incorrect humidity level is being
displayed.
Room is larger than the effective range
of the humidifier.
Move the humidifier to a room which
is with suitable room size.
Moisture has built up inside of the
humidity sensor.
Turn off the humidifier and allow the
humidity sensor to completely air dry
before resuming use.
The nozzle is facing the direction of the
humidity sensor.
Turn the nozzle so that it is facing away
from the humidity sensor.
Humidity sensor is broken of defective.
Contact Customer Support.
Control panel does not work
Hands are too wet when operating
control panel.
Keep hands dry while operating the
control panel.
Humidifier has malfunctioned.
Contact Customer Support.