User's Manual

EN-6
2. Connect the AC adapter to an AC 120V~ 60Hz power source. Use the PowerOn/Off
Switch to turn the speaker ON or OFF.
3.If the speaker has never been paired/linked with a Bluetooth enabled device, you
need to follow the pairing instructions below:
a) Turn on the speaker by sliding the Power On/Off Switch to “ON”. The Power/
Status indicator should light and remain on.
b) Turn on the Bluetooth function of your device and enable the search or scan
function to find the speaker.
c) Select "KT4557" from the device list when it appears on your device screen.
Enter the pass code “0000” to pair (link) the speaker with your device.
d) If you are pairing (linking) your computer to the speaker using Bluetooth,
you may need to set the KT4557 as your computer's default sound device.
4.After turning on the speaker, the unit will search for the last paired device.
5.After pairing the speaker with your Bluetooth device successfully, you can play music
from your Bluetooth device wirelessly from the speaker.
6.Adjust the volume on your Bluetooth enabled device to obtain the desired loudness.
NOTE: All control functions should be achieved from your Bluetooth enabled device.
7.If the unit needs to pair with another Bluetooth device, repeat step 3 above but press
Pair Button instead of turning on the power. The Power/Status indicator will flash
once.
8.To turn the speaker off, slide the Power On/Off Switch on the back of the speaker to
the OFF position. The Power/Status indicator will go off.
PLAYING FROM A BLUETOOTH DEVICE
1. Make sure the Power On/Off Switch is in OFF position. Insert one end of the AC adapter
(Included) into the DC Input Jack on the back of the speaker.