Product Manual
Maintenance of sensor
Maintenance
Aer machine running for a long me,the dust will accumulate around the sensor due to the
ellectorstac.It will disturb the data of PM2.5;so you should clean for the dust of sensor inside.
Open the front cover and take the recover
of sensor out .With the pumping device
alignment sensor vent blowing, clean the accrete dust.
Filter replacement
Long term use of the filter, and according to the environment, the efficiency of the filter will be reduced,
the replace ment for the whole new filter is necessary
"Aenon"Please replace the filter according to the normal use of me aer the expiraon of
the filter, to avoid the pollucon of dirty filter.Before the expiraon of the filter network to
replace the filter, and not reset the reset me, the system connues to be the first me;Filter
the service life of the network(about 4-6 months ).
Please purchase our company's authenc filter through the regular channels.
Accroding the the enviroment,it is suggested to chek weather the filter is dirty or not monthly .
Pls replace the filter if you find it is dirty promptly.