Product Manual
Product use
Install this machine in furtniture that inside is empty and with side, Pls make the furniture following
size request refer to.
①.Remove the outer
packing and turn on
the buon on the down
of front cover(Front cover is aached to
fuselage by 4pcs mangent)
②.Aer puut the round top of power plug into the
supply hub,pls keep a long enough line to get with
socket(AC220V/50HZ) and insert the remained
power line to the furniture inside.
③.Install the machine
into the open part of
the furniture and fixed it stably by locking
6 pcs screw at the edge of cover.
④.Put the front cover
to install the body and
make sure it is lipped in.
Filter installaon
For the first me using this product, please be sure to remove the outer packing of the filter as followd.
①.Open the front cover and take out the filter.
Remove the outer packing and put into the
machine.Pls make sure the carbon layer to be up.
"Note" all filter into the product, ensure that you
face with a drawing piece side.
②.Install the front cover and put the power plug into
the socket, hear "beep" sound,Said the power is
connected, the product enters the standby mode.
Press the power panel to control operation.