Product Manual

Safety precauons
"Dangerous" Do not let water or any other liquid or flammable cleaning agent into the
product, in case to avoid electric shock or fire and other safety issues;Do not put hard stuffing
inside the wind wheel to avoid damage;The running process of products will prohibit the finger into
the outlet and inlet, so as not to cause harm;
"Warning"Before the power plug is connected to the power supply, please first confirm whether the
access power is in line with the product idenficaon input power parameters;If the power cord is
damaged, it must be replaced by the manufacturer to the maintenance department or similar department;
If the plug, power cord or product itself is damaged, do not use this product, mely maintenance;
This product is not designed for physically or mentally handicapped or lacking in relevant experience
and knowledge.The use of children, unless the person responsible for their safety, is used to guide and
supervise the use of this product;Do not plug the product into the outlet, the outlet and air quality / smell
sensor into the outlet, and to maintain the surrounding air smooth;Maintenance cleaning process, the
power supply plug to pull out.
"Remind"To save energy and protect your safety, please do not use the product for a long me.
"Aenon"To improve the efficiency of purificaon, the le and right sides of the products should be
set aside at least 30 cm of natu;Before you turn on the power supply, make sure that all filters Please
do not use a hard object hing the scratch, this product;In order to ensure the best purificaon
efficiency, please use the company's customized specificaons of the filter;When you use the indoor
bug spray or full of flammable gas, do not use this product;Purifier open beginning of operaon, first
proposed high-speed operaon aer a period of me to the other running speed;For a long period of
me, the inner wall and the filter should be checked before starng the machine, when necessary,
replace the filter.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a
residenal installaon. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However,
there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause
harmful interference to radio or television recepon, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separaon between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
Cauon: Any changes or modificaons to this device not explicitly approved by manufacturer could void your
authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operaon is subject to the following two condions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operaon.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable
exposure condion without restricon.