Please read the instruction manual carefully before using the product Air Purifier - Bluetooth Product Manual
Safety precautions "Dangerous" Do not let water or any other liquid or flammable cleaning agent into the product, in case to avoid electric shock or fire and other safety issues;Do not put hard stuffing inside the wind wheel to avoid damage;The running process of products will prohibit the finger into the outlet and inlet, so as not to cause harm; "Warning"Before the power plug is connected to the power supply, please first confirm whether the access power is in line with the product identification input power par
Preface Thank you for purchasing the intelligent air purifier, thank you. Before you use this product, please be sure to read the instructions carefully and use the contents of the instructions. Please keep this instruction manual carefully, so as to prepare for future inquiry and maintenance. Specification parameter Dimension: 280X138X200mm; Product net weight: 1.5Kg (including filter); Input voltage: DC12V; Power: less than 12W; Ventilation: above the inlet, outlet side.
Decomposition product function structure A B C H D E G F Structure name A. Back cover B. main body C. Composite filter /motor D. Dust sensor E. Air outlet and anion F. Touch area G. Front panel H. Cigarette lighter fragrance box I . DC12V power plug I Fixed size requirements 2 In order to ensure the smooth assembly of air purifiers, and effective air purification efficiency, the size of the relevant reference dimension on the right side of the label, and to ensure the smooth internal ventilation.
Warranty card Product model Name Sex Address Telephone Purchase position Purchase date Transactor Telephone of purchase position Overhaul date Maintenance record Repair personnel Customer recognition Remarks 1、 Warranty scope please refer to the "after sale service rights and interests" in this instruction manual; 2、 please take good care of this card, warranty required to produce the card and purchase vouchers; 3、 it needs to store only be effective
Product use Install this machine in furtniture that inside is empty and with side, Pls make the furniture following size request refer to. ①.Remove the outer packing and turn on the button on the down of front cover(Front cover is attached to fuselage by 4pcs mangent) ②.After puut the round top of power plug into the supply hub,pls keep a long enough line to get with socket(AC220V/50HZ) and insert the remained power line to the furniture inside. ④.Put ③.
Product operation control Function control and display AUTO IAQ PM2.5 HIGH MID LOW Display Product Icon Icon Function Poducts in the standby ode,press this key to start,LED lights to indicate the product into the running state; Press this key while machine running and it will turn off. Press this button while the machine running ,the product enters speed adjustment mode: auto mode/high/medium/low speed. Press this button while the machine running to set timer.It can set 1H-8H timer.
Maintenance Maintenance of sensor After machine running for a long time,the dust will accumulate around the sensor due to the ellectorstatic.It will disturb the data of PM2.5;so you should clean for the dust of sensor inside. Open the front cover and take the recover of sensor out .With the pumping device alignment sensor vent blowing, clean the accrete dust.
Common problems and troubleshooting Problem data of PM2.
