User Manual

20
 Stream
The default stream supports multiple modes, For example: HD Mode/720P/23fps/2M meanings: Stream
type / Resolution / Maximum frame rate/ Bit rate. (Different models support different specific mode. )
Stream type : It is used to identify the stream type.
Resolution
The bigger the resolution, the better of the image quality is. If you are accessing the camera via
internet and want to get more fluent video streaming, please select resolution VGA.
Maximum frame rate
You should lower frame rate when the bandwidth is limited. Normally, when the frame rate above 15,
you can achieve fluently video. The maximum frame rate for each model is different, please see the
“Specifications”.
Bit rate
Generally speaking, the larger the bit rate is, the clearer video will become. But the bit rate
configuration should combine well with the network bandwidth. When the bandwidth is very narrow,
and bit rate is large, that will lead to video can not play well.
You can reset the stream type on Settings-> Video-> Video Settings panel.
After changing, please reboot the camera and you can see the modification.
 WDR
In surveillance, WDR (Wide Dynamic Range) is intended to provide clear images even under
backlighting, where the intensity of illumination varies a lot—namely when there are very bright and very
dark areas simultaneously in the camera's field of view.
Section 4 IR LED Lights / Color Adjustment
Click Infra led and there are three modes to adjust the infrared led: Auto, Manual and Schedule.
Auto: Select it and the camera will adjust the infra led (on or off) automatically.
Manual: Select it and you can turn on or turn off the infra led manually.
Schedule: Select it and the IR led light will be off at the schedule period. If you want to define or change
the IR led lights schedule time, please go to Settings--->Video---> IR LED Schedule page.
Color Adjustment
In this page, you can tune Brightness, Contrast, Saturation, and Sharpness to get higher quality.