Installation Guide

2 Physical Description
Quick Setup Guide
Security Tips
Package Contents
Power Adapter
IP Camera
Quick Setup Guide
3 Setting Up Your Camera:
Connection via the Foscam App
(Recommended)
Setting Up Your Foscam
Security Camera
1 Getting Started
To view this guide in other languages (e.g. Nederlands, Deutsch,
Français, Español), and for detailed manuals, tools, etc., please visit
foscam.com/downloads.
To ensure a smoother video experience on your smart phone, it is
recommended that your smart phone meet the following specifications:
iOS: version 11 or higher.
Android: 4.1 or higher, using a device with a Graphics Processing
Unit (GPU).
Warning:
Quick Setup Guide
Before You Get Started
2. Make sure your smart phone is connected to the same WiFi network as
the camera.
4. After logging into Foscam APP, select “Tap to add a camera” or "+"
icon on the upper right corner, then select "Scan the QR code" and
scan the QR code labeled on the bottom of your camera.
Scan the QR code which
is located at the bottom
of your camera.
Tap + icon
Tap to add a camera
Add Device
<
Scan the QR code
Search in LAN
Manually add
Select ”Scan
the code”
Scan QR Code
<
Model: XXX
MAC ID:000000000000
Username(default):admin
Password(default):(blank)
DDNS:XXXXXX.
myfoscam.org
FCC ID:XXXXX
IC:12558A-XX
S/N:FIAI1403000001
UID:XXXXXXXXXXX
FHD Wireless IP Camera
3. Open the foscam APP and please register a Foscam account, or sign in if
you have one already.
5. In “Add Device”, if you hear "Hello Foscam", select the checkbox and
tap ”Next”, continue to confirm that the device is in the blue flashing
state and tap ”Next”. In “WiFi connection”, enter your WiFi's password
and tap "Confirm".
Please change the camera's password regularly, using a combination
of numbers, letters and special characters.
We recommend that you regularly update your camera with the latest
available software and firmware to ensure the best experience with
your camera.
The cords on this product are a potential strangulation hazard. For child
safety, please keep these cords out of the reach of children.
Scan the QR code below to download and install the Foscam APP.
WiFi connection
Note: For the best experience, please update the APP to the latest version!
1. Plug the power adapter into the camera, and please wait for a few
seconds until hearing the “Ready for WiFi configuration”.
Micro SD Card Slot
Microphone
Spotlight
LED Indicator
Light Sensor
Reset
Spotlight
Speaker
Passive infrared
motion sensor
Support email: [e-mail]
FAQS
LAN
Power
Expansion Screws
V1.1
305503000601
Heard "Hello Foscam"
and tap "Next"
Confirm device
flashes blue
I have heard “Hello Foscam”
Add Device
Next
Power the device on until
the device voice prompts
"Hello foscam"
<
Device flashes blue
Add Device
Next
Confirm that the device is
in the blue flashing state
Enter your WiFi's password
and tap "Confirm"
Wi-Fi connection
The device will added by scanning the QR
code and sound waves.
Foscam_2.4G
<
WiFi Password
Confirm
2.4GHz / 5.0GHz
6. Please scan the QR code on the doorbell with the smartphone camera,
then you will hear a voice prompt say ”WiFi connecting”. Select the
checkbox and tap ”Next”.
Place the QR code directly
in front of the camera
Tick the checkbox and tap “Next”
Tips: Please place the QR code on the phone screen about 10 to
15cm (3.94 to 5.9in) away, and if you encounter difficulties you can try
to move the screen slowly around 10 – 15cm (3.94 - 5.9in).
10~15cm
For WiFi configuration, please point the
QR code to the camera directly.
WiFi connection
<
I have heard the voice prompt
“WiFi connecting”
Next
3.94~5.9in
Lens
Tips: The camera supports dual-band 2.4GHz and 5GHz WiFi networks,
so you can choose the channel with the stronger signal to use.
For example, choose your SSID: XXXXX_2.4G or XXXXX_5G.
Confirm
WiFi connection
WiFi
Foscam_1
Foscam_2
xxxxx_2.4G
xxxxx_5G
7. Wait a few seconds until the camera notifies you that the “Wireless
connection succeeded”, which means your camera has connected to
your WiFi successfully. After, you can set the camera name and tap
“Save” in "Set name" interface.
Camera added successfully
and the name has been set
Set name
Save
Camera added successfully
Please set the camera name:
My Camera
Note: If the process of adding a camera fails, please reset your camera and
try adding again according to the above method.
Reset Button
Ethernet Cable
Ethernet port
waterproof kit