Installation Guide

Foscam Digital Technologies
www.foscam.us www.foscam.ca www.foscam.co.uk
www.foscamgroup.com www.foscam.com
V4.1
EE200418
Package Contents
Quick Installation Guide
Resource CD
Ethernet Cable
Power Adapter
Mounting Bracket
IP Camera
1 Hardware Introduction
Physical Description
Microphone
Infrared LED
LENS
Speaker
Reset Button
Mounting Port
Hardware Connection
2 Software Installation
1. Insert the CD into the CD drive of your computer.
2. Go to the folder “IP Camera Search Tool” and find the folder
“For Windows OS”or “For Mac OS”. Copy and paste the IP camera
tool file to your computer, or drag it onto your desktop.
Shortcut icon for Windows OS
Shortcut icon for Mac OS
3 Access the IP Camera
in LAN
1. Enable the DHCP feature of your router (Enabled by default
normally), then open the IP Camera Tool program. It should
display the camera’s IP address in your LAN (Local Area Network).
Note：
Doesn't support 64-bit browser.
3. After installing the add-on, refresh the browser and click Login .
Main stream offers the highest
quality video while Sub stream
offers less quality, but also less
delay when viewing.
Default username is admin with
no password.
Input the New username,
New password and
Confirm the password.
5. After log in, you will see live video on the interface.
Notes:
After log in for the first time, it will go to "Setup Wizard”
automatically. Please set the basic parameters, such as the camera
name, camera time, wireless settings and more.
If you forget your username or password, you can press and
hold the reset button on the bottom of the camera using a pin for
5 seconds. This resets the camera to factory defaults.
If you want to access your camera over wireless or the Internet,
please continue with the setup by following the Wireless and
Remote Access steps below.
Click Install
4. When you log in for the first time, it will request that you modify
the default username and/or password. Input the New username,
New password, and Confirm the password, click Modify to
complete the modification. You will now use the new username
and password to login to the camera in the future.
Security Warning Card
Security Warning
Foscam cameras require good security practices to
safeguard your privacy. You can help protect your camera
by changing the default username and/or password.
You should update your camera regularly at
http://www.foscam.us/firmware.html. Make sure your
camera has the latest firmware installed for your specific
camera model.
2. Double click the camera listed here, and your default browser
will open up to the camera’s login page. When log in for the first
time, you will need to download and install the add-on. We will
use Internet Explorer as an example. For Google Chrome, Apple
Safari, or Mozilla Firefox, please refer to the User Manual.
Notes:
If your computer ( Windows OS ) supports autorun function ,
you can find the corresponding file in the opened control panel.
I f your computer doesn’t have CD drive, you can download
the IP camera tool from our website for free.
Quick Installation Guide
Model:FI9821P
Indoor HD Wireless IP Camera with P2P
Black
White
Wi-Fi Antenna
OUT IN
ANT
Micro SD
WPS
AUDIO
DC 5V
LAN
Power
Power light
Network light
Output
Input
Antenna
WPS
Micro SD Card Slot
WPS
IN
OUT
ANT
SD
AUDIO
WPS
o
1. Mount the antenna and make it stand vertically.
2. Connect the camera to the LAN network (Router or Switch) via
network cable.
3. Connect the power adapter to the camera.
WPS (Wi-Fi Protected Set-up)
We recommend that you use WPS function to setup wireless
connection.
1. Press and hold the WPS button for two seconds.
OUT IN
ANT
SD
DC 5V
WPS Button
2. Press the WPS button on your wireless router within 60
seconds. The WPS button is usually on the front or back of
your router. If you are not sure about the WPS function of
your router, please refer to your router’s User Manual.
4 Wireless Connection
Quick Installation Guide
Model:FI9821P
Indoor HD Wireless IP Camera with P2P
Black
White