Quick Start Guide

Mount Your Camera to the Wall
1. Fasten the mounting screw into the wall.
2. Hang the Magnetic Wall Mount from the screw.
CHARGE YOUR
BATTERY
2. Connect the power adapter and cable as shown below:
Note: Before mounting the Magnetic Wall Mount, please ensure that the
camera is positioned towards the precise area you would like to monitor.
Note: If you are using the camera outside, bring it inside while
charging the battery.
3. The camera LED light will stay solid green when the battery is fully
charged.
PLACE / MOUNT
YOUR CAMERA
1. Apply the single-sided adhesive tape provided in the package to the
bottom of the camera.
2. Place your camera on a flat surface and position the camera to
monitor the area that you would like to.
Place Your Camera on a Flat Surface
You can place your camera on a flat surface (desk, shelf, table, etc.)
1. Place the camera indoors. If the camera is currently mounted to a wall,
remove it from the Magnetic Wall Mount.