Customer Care If you have any questions regarding your product, please contact Foscam Customer Care. Email: support@foscam.com www.foscam.
WHAT'S IN THE BOX E1 Base Station E1 Camera Rechargeable Battery Ethernet Cable Note: Please fully charge the battery before first use.
PHYSICAL DESCRIPTION E1 Base Station PHYSICAL DESCRIPTION E1 Camera Sync / Siren Off Button Press the button to sync camera with Base Station. Press the button to turn off the siren manually. Sync/Siren Off DC 12V USB . LAN . Sync . Power DC 12V DC 12V . On/Off . USB . Reset . LAN Green: The Base Station is connected to an external Sync Button: Press this button to sync the E1 with the Base Station. USB Storage Device. Blinking Green: The system is recording.
WIRELESS CONNECTIVITY Router DC 12V Power Cable Ethernet Cable
SETTING UP YOUR E1 SYSTEM 1. Insert the Rechargeable Battery Into Your Camera a. Unlock the Rechargeable Battery compartment by pressing and holding the latch. 2. Connect Your Base Station to the Internet 1. Connect the Base Station to your router with an Ethernet Cable. b. The battery door will open automatically. Router a~b LAN DC 12V Ethernet Cable c. Align the battery contacts. d. Insert the Rechargeable Battery. 2. Plug the Base Station Power Adapter into an electrical outlet.
3. Download Foscam App To download the free Foscam App, simply scan the QR Code below. You can also search for "Foscam" in the App Store or Google Play store to download and install Foscam App as well. 5. Add the Base Station to an Existing Foscam Account 1. Tap the Foscam icon Foscam Account. 2. Tap on your smartphone, then login to your . Foscam With the Foscam App, you can turn your iOS or Android smartphone into a monitoring center for your security system. 3.
PLACE / MOUNT YOUR CAMERA CHARGE YOUR BATTERY Place Your Camera on a Flat Surface 1. Place the camera indoors. If the camera is currently mounted to a wall, You can place your camera on a flat surface (desk, shelf, table, etc.) 1. Apply the single-sided adhesive tape provided in the package to the bottom of the camera. remove it from the Magnetic Wall Mount. Note: If you are using the camera outside, bring it inside while charging the battery. 2.
SYNC YOUR CAMERA WITH THE BASE STATION When adding additional E1 cameras to your system, you will need to individually sync them to the Base Station. 4. When Sync Status LED blinks green, press the Sync button on top of the camera for about two seconds, and then release it. 1. Please insert the Rechargeable Battery into the camera. 2. Place the camera within 1 to 3 feet (30 to 100 centimeters) of the Base Station. Within 1 to 3 feet A green LED on the camera will blink rapidly while syncing.
