User Manual E1 V1.
Contents Security Warning..............................................................................................................................III What's In the Box............................................................................................................................ IV 1. Overview........................................................................................................................................1 1.1. Key Features..............................................
4.11.1 Rename Your Camera....................................................................................... 41 4.11.2 View Camera Information................................................................................. 42 4.11.3 Change Speaker Volume.................................................................................. 44 4.11.4 Change Video Quality........................................................................................46 4.11.5 Adjust the Power Frequency................
Security Warning Please change the password of your Base Station regularly, using a combination of numbers, letters and special characters. We recommend that you regularly update your camera and Base Station to the latest available software and firmware versions to help ensure the best experience for your system.
What's In the Box E1 Base Station E1 Base Station Power Adapter E1 Camera E1 Camera Power Adapter Rechargeable Battery Magnetic Wall Mount Ethernet Cable Camera USB Power Cable Mounting Screws & Anchors Single-sided Adhesive Tape IV
1. Overview 1.1. Key Features HD Video: 2.0 Mega-Pixel, enjoy sharp, detailed video. Human Detection: The human detection feature lets you set the camera to send alerts only when human motion is detected. This cuts down inessential alerts such as those caused by pets, drapes under an AC vent, or foliage swaying in wind. IR Range: IR LEDs for IR range up to 8m (26ft). Rechargeable Battery: Cameras include rechargeable battery that support fast charging and long lasting batteries.
1.2. Physical Description E1 Base Station Sync / Siren Off button Press the button to sync camera with Base Station. Press the button to turn off the siren manually. Green: The Base Station is connected to an external USB Storage Device. Blinking green: The system is recording. Amber: The external USB Storage Device is full or disabled. Off: No USB Storage Device is inserted. Green: The Base Station is connected to the Internet.
E1 Camera Sync Button: Press this button to sync the E1 with the Base Station. Green Slow Blinking : Sync in process.. Solid Green Then Off: Sync process completed. Blinking Amber Rapidly: Fail to sync. Blinking Amber Slowly Then Off: The camera's battery level is low. Off: Camera is on standby or the battery is depleted.
1.3.
2. Setting Up Your E1 System 2.1. Install the Rechargeable Battery Into Your Camera a. Unlock the Rechargeable Battery compartment by pressing and holding the latch. b. The battery door will open automatically. a~b c. Align the battery contacts. d. Insert the Rechargeable Battery. c~d e. Close the battery door. e When the in-package camera is powered on, its LED light will blink green repeatedly, indicating that it in the process of syncing with the Base Station.
2.2. Connect Your Base Station to the Internet 1. Connect the Base Station to your router with an Ethernet cable. 2. Plug the Base Station Power Adapter into an electrical outlet. 3. Press the On/Off button, and wait until the power and Internet lights turn green. With a minute, the camera will connect to the Base Station automatically. A green LED on the camera will blink rapidly while syncing.
2.3. Download Foscam App To download the free Foscam App, simply scan the QR Code below. You can also search for "Foscam" in the App Store or Google Play store to download and install Foscam App as well. With the Foscam App, you can turn your iOS or Android smartphone into a monitoring center for your security system. 2.4. Get a Free Foscam Account To create a new Foscam account launch the Foscam App from your smartphone, tap the Sign Up button, and follow the onscreen instructions.
2.5. Add the Base Station to an Existing Foscam Account 1. Tap the Foscam icon on your mobile phone, then login to your Foscam Account. 2. Tap 3. Select Base Station, Tap Next to scan the QR code of the Base Station, or tap Alternate Setup to add the Base Station. 4. . Follow the onscreen instructions. 2.6. View Your Video Footage When you launch the Foscam App, the devices page will display. To view and listen in on a live feed, tap or click Live on the camera feed image.
2.7. Place / Mount Your Camera 2.7.1. Place Your Camera on a Flat Surface You can place your camera on a flat surface (desk, shelf, Table, etc.) 1. Apply the single-sided adhesive tape provided in the package to the bottom of the camera. 2. Place your camera on a flat surface and position the camera to monitor the area that you would like to. 2.7.2.
2. Hang the Magnetic Wall Mount from the screw. 2.8. Charge Your Battery 1. Place the camera indoors. If the camera is currently mounted to a wall, remove it from the Magnetic Wall Mount. Note: If you are using the camera outside, bring it inside while charging the battery. 2. Connect the power adapter and cable as shown below: 3. The camera LED light will stay solid green when the battery is fully charged.
2.9. Sync Your Camera with the Base Station When adding additional Foscam E1 cameras to your system, you will need to individually sync them to the Base Station. 1. 2. Please insert the Rechargeable Battery into the camera. Place the camera within 1 to 3 feet (30 to 100 centimeters) of the Base Station. 3. Press and hold the Sync button on the top of the Base Station for about two seconds and then release it. 4.
A green LED on the camera will blink rapidly while syncing. The camera LED will then turn off , and the Sync Status LED of the Base Station will turn solid green, indicating that sync is successful and the camera is ready for viewing! Note: If the camera LED blinks an Amber color, then sync has failed. Please repeat the sync process again and ensure that the camera is within 1-3 ft. of the Base Station. Syncing more than one camera? Repeat steps 1 through 4 for each camera.
3. View Your Content To view and listen to a live feed, tap Live on the camera feed image. To view your camera's alarm video recordings in cloud by tapping the timebar in the live page. 3.1. View the Devices Page When you launch the Foscam app, the devices page displays.
3.2. Watch Live You can view a livestream of your camera at any time. 1. Tap the Foscam icon on your mobile device. The Devices page displays. 2. Tap Live to view and listen to a live video. A row of live feed icons displays below the live stream image for the camera.
Icons Back Speaker / Mute the audio Record video manually Snapshot Two-way audio Full screen More On this screen, you can listen to a livestream, record clips, take a snapshot, activate two-way talk or full screen. If you want to catch the smaller details, pinch and drag any image as you do with photos on your smartphone.
3. To stop viewing and listening to the live feed, tap the Back icon. 3.3. Record Clips From Live Video To record a short clip of the event to the cloud. 1. Tap the Foscam icon on your mobile device. The Devices page displays.
2. Tap Live to view and listen to a live video. A row of live video icons displays below the live stream image for the camera. 3. Tap Recording to start recording.
This icon turns blue to indicate that you are recording the live feed, and the recording item will be showed on the middle of the live 4. Tap Recording . to stop recording. The recording is saved in your Foscam cloud.
3.4. Take a Snapshot From Live Video 1. Tap the Foscam icon on your mobile device. The Devices page displays. 2. Tap Live to view and listen to a live video. A row of live video icons displays below the live stream image for the camera.
3. Tap Snapshot . The snapshot is saved in Album.
Also, you can view it in Sidebar > Album . 3.5. Talk and Listen 1. Tap the Foscam icon on your mobile device. The Devices page displays.
2. Tap Live to view and listen to a live video. A row of live video icons displays below the live stream image for the camera. 3. Press and hold the button and speak. When the button is bright blue, two-way audio is ready. 3.6. View Alerts You can view all alerts of the system, for example motion detection.
1. Tap the Foscam icon on your mobile device. The Devices page displays. 2. Tap on the live video to view alerts. 3.7.
storage. You can access these recordings from anywhere you are using a mobile phone. All recordings are encrypted with the user name and password which you have created, no one else can access. We provide free cloud storage for the life of the cameras. We store a rolling 7 days of recordings that are created when the camera detects motion. You can connect up to 4 cameras free of charge. For how to active 7 Day Cloud Storage, please refer to Active 7 Day Cloud Storage.
1. Tap Cloud History to view and listen to a recorded video. Note: Days in which a video clip was recorded are indicated with an amber circle.
4. Device Settings 4.1. Active / Deactivate 7 Day Cloud Storage 1. Tap the Foscam icon on your mobile device. The Devices page displays. 2. Tap Setting > My Plan > Active Now, the cameras are active.
3. Tap Manage Cameras conform the active cameras.
4. To DEACTIVATE the cameras. Tap the active cameras, a Dialog Box will be displayed, Tap Continue. We provide free cloud storage for the life of the cameras. We store a rolling 7 days of recordings that are created when the camera detects motion. 4.2. Turn On the Siren Manually WARNING: This may get loud and possibly damage your hearing if you are too close to the Base Station. 1. Tap the Foscam icon on your mobile device.
The Devices page displays. 2. Tap Alarm > Yes to turn on the siren manually. 4.3. Turn Off the Siren Manually To turn off the siren when near the Base Station Press the Sync / Siren Off button on the top of the Base Station to stop the siren.
1. Tap the Foscam icon on your mobile device. The Devices page displays. 2. Tap Close Siren to stop the siren.
4.4. Rename Your Base Station 1. Tap the Foscam icon on your mobile device. The Devices page displays. 2. Tap Setting > Base Station Info .
3. Enter a new name for the Base Station. The new name will be displayed in the app. 4.5. View Base Station Information You will view Base Station name, Model, UID, MAC ID and the firmware level. 1. Tap the Foscam icon on your mobile device. The Devices page displays.
2. Tap Setting > Base Station Info . 3. You will view Base Station name, Model, UID, MAC ID and the firmware version on this page.
4.6. Sync Time 1. Tap the Foscam icon on your mobile device. The Devices page displays. 2. Tap Setting > Sync Time . The camera time is synced with the local time.
4.7. Security Settings Security Warning: We recommend that you change the password of your Base Station regularly, using a combination of numbers, letters and special characters. 1. Tap the Foscam icon on your mobile device. The Devices page displays. 2. Tap Setting > Security Settings .
3. Change the Base Station username and password as below figure: 4. Tap Save to save it. 4.8. Upgrage Base Station Firmware Warning: We recommend that you regularly update your Base Station to the latest available firmware version to help ensure the best experience for your Base Station. 1. Tap the Foscam icon on your mobile device.
The Devices page displays. 2. Tap Setting > Firmware Upgrage 3. Tap Upgrage to upgrage the latest available firmware. .
After a Base Station firmware update, the Base Station reboots and connects to the Internet. Important: Please make sure the Base Station is powered on while it is updating and installing firmware. 4.9. Restart Base Station 1. Tap the Foscam icon on your mobile device.
The Devices page displays. 2. Tap Setting > Restart Base Station 3. Tap Restart to restart Base Station. . 4.10. Delete Base Station 1. Tap the Foscam icon on your mobile device.
The Devices page displays. 2. Tap Setting > Delete Base Station 3. Tap Yes to delete Base Station. .
4.11. Camera Settings 4.11.1 Rename Your Camera 1. Tap the Foscam icon on your mobile device. The Devices page displays. 2. Info Tap Setting > Camera Settings > Select a Camera > Camera .
3. Enter a new name for the camera. The new name will be displayed in the app. 4.11.2 View Camera Information You will view camera name, Model, MAC ID and the firmware version. 1. Tap the Foscam icon on your mobile device.
The Devices page displays. 2. Info Tap Setting > Camera Settings > Select a Camera > Camera .
3. You will view camera name, Model, MAC ID and the firmware version. 4.11.3 Change Speaker Volume You can control the volume on your camera settings. 1. Tap the Foscam icon on your mobile device.
The Devices page displays. 2. Tap Setting Speaker Volume > Camera Settings > Select a Camera > Camera .
3. To change the speaker volume, move the Speaker Volume slider. Your settings are saved. 4.11.4 Change Video Quality There are three options for you to choose. Decreasing the resolution of videos reduces the required WiFi bandwidth and battery life. 1. Tap the Foscam icon on your mobile device.
The Devices page displays. 2. Tap Setting Settings > Camera Settings > Select a Camera > Video .
3. Tap Image Quality, choose a setting. Your settings are saved. 4.11.5 Adjust the Power Frequency If the camera video is flashing, please try to adjust the power frequency. 1. Tap the Foscam icon on your mobile device.
The Devices page displays. 2. Tap Setting Frequency > Camera Settings > Select a Camera > Power .
3. Tap a setting. Your settings are saved. 4.11.6 Turn On / Off the Camera LED The LED on the camera lights in different colors. You can turn off this LED.
1. Tap the Foscam icon on your mobile device. The Devices page displays. 2. Tap Setting > Camera Settings > Select a Camera > Prompt Setting .
3. Tap the button on the right side of Status LED to turn on / off the camera LED. Your settings are saved.
4.11.7 Turn On / Off the Voice Prompt The voice prompt is ON by default. You can turn off the voice prompt. 1. Tap the Foscam icon on your mobile device.
The Devices page displays. 2. Tap Setting > Camera Settings > Select a Camera > Prompt Setting .
3. Tap the button on the right side of Voice Prompt to turn on / off the voice prompt. Your settings are saved. 4.11.8 Upgrade Camera Firmware Warning: We recommend that you regularly update your camera to the latest available firmware version to help ensure the best experience for your camera. 1. Tap the Foscam icon on your mobile device.
The Devices page displays. 2. Tap Setting Upgrade > Camera Settings > Select a Camera > Firmware .
It will upgrade the firmware automatically if the firmware of camera is not the latest. Important: Please make sure the camera and Base Station are powered on, and do not move them while it is updating and installing firmware. After the camera firmware update completes, the camera syncs to the Base Station again and the camera LED blinks green rapidly for 10 seconds. 4.11.9 Delete a Camera 1. Tap the Foscam icon on your mobile device.
The Devices page displays. 2. Tap Setting Camera > Camera Settings > Select a Camera > Delete .
3. Selecting Delete the history files of the camera to delete the history files.
4. Tap OK to delete the camera. 4.12. Forgotten Base Station User Name & Password? To reset the Base Station user name and password, you had better unplug the network cable firstly. After that, press and hold down the RESET BUTTON about 5 seconds. Releasing the reset button, the password will turn to the factory default.
5. App Settings 5.1. 1. View the Live Video Only In WiFi Environment Tap the Foscam icon on your mobile device. The Devices page displays. 1. Tap Sidebar > (App) Settings .
2. 5.2. Tap the WiFi Only for Streaming On/Off button to enable the setting. Push Messages When a trigger is detected, App can send you messages if the Push Messages of the Base Station is ON. 1. Tap Sidebar > (App) Settings .
2. Tap Push Messages , turn On button to set push messages function on Base Station 1. 5.3. Devices List Settings 1．Tap the Foscam icon on your mobile device. The Devices page displays.
2. Tap Sidebar > (App) Settings > Devices List Settings . 3. Hold and drag a Base Station to the correct position on the list. Your settings are saved. 5.4. 1. Sign Out Tap the Foscam icon on your mobile device.
The Devices page displays. 2. Tap Sidebar > Sign Out 3. Tap the Yes to sign out the app. .
66
6. Appendix 6.1. CE & FCC Electromagnetic Compatibility (EMC) FCC Statement This device compiles with FCC Rules PART 15C of the FCC Rules. Operation is subject to the following two conditions. This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. 6.2. WARRANTY FOSCAM values your business and always attempts to provide you the very best of service. No limited hardware warranty is provided by FOSCAM unless your FOSCAM product ("product") was purchased from an authorized distributor or authorized reseller. Distributors may sell products to resellers who then sell products to end users.
Write your RMA number and the return reason (the problem of the product) on the warranty card along with the complete package to send them back. Replacement Services If customers ask for replacement service, please contact point-of-purchase and follow their policy. Our technicians will inspect all items returned for replacement requests. If the retuned product is found in working order, we will return the same item received.
Shipping Fee If products are defective or damaged under normal use or operation in the replacement limit, distributors or resellers are responsible for the shipping cost the product back to customers, customers should assume the shipping cost send the product to the point-of-purchase. During replacement limit, if customers ask for replacement due to the product does not fit for customer's personal expectation, customers should responsible for both shipping fee.
6.3. Statement We advise that you take steps to safeguard your privacy. This includes keeping personal account information private, changing your account and equipment password periodically, and upgrading firmware whenever updates are available. Our company makes no warranty, implied or otherwise, that this product is suitable for any particular purpose or use. You need to abide by the relevant laws and regulations of the use restrictions when using Foscam cameras.
Our company will reserve the right to improve and modify the product and corresponding manuals. The company reserves the right of final interpretation on our products.
7. Obtaining Technical Support While we hope your experience with the IP camera is enjoyable and easy to use, you may experience some issues or have questions that this User Manual has not answered. If you experience any issues with your FOSCAM devices, please first contact the FOSCAM resseler for assistance. If our reseller cannot provide service, please contact our service department: support@foscam.com. 1. Tap the Foscam icon on your mobile device. The Devices page displays. 2.
74
