User Manual

65 87
1
2
3 4
Quick Setup Guide
Security Tips
2
1
4
NVR Structure
Device Connection
V1.1
305503000543
Package Contents
VGA Output
Power Input
HD-OUTReset
USB
USB
Power Switch
Ethernet PortIP Cameras Input
5
Technical Support 7
3
Installing the Cameras
Step One - Connect Monitor
Step Two - Connect your cameras
Please Note:
Ensure that the rain or water will not reach the connector
ports at the end of the pig tail wiring. These connectors are
not weather-resistant.
B: Connect the NVR to a Monitor or TV
Use the VGA cable that came with your monitor to connect it to
the NVR’s VGA port.
To connect your cameras to the NVR simply connect the supplied
cable in to the socket of the small cable coming from the camera
then plug the other end of this cable into one of the ports on the
back of the NVR.
There is a one-to-one relationship between the IP Camera Input
port and the video channel of your NVR.
Step Three - Connect to your network
Step Four - Connect the mouse
Step Five - Connect the power adapter
Please connect your NVR to the router using Ethernet cable.
Please make sure your router is connected to the internet.
The USB mouse supplied with your NVR can be connected to
either of the two rear USB ports.
Connect the power adapter to the power input port.
The connection are now complete. You can turn on the
power to enter your NVR’s user interface.
Power Switch : Power on / off button.
IP Cameras Input : These ports are for both power and video and are
where you plug in your camera cables.
Ethernet Port :
10 / 100Mb. You can connect your NVR to the internet via
the Ethernet cable.
VGA Output : Connect to your TV or computer monitor via VGA port.
Power Input : This is where you connect the NVR’s DC power supply.
USB : For connecting your USB mouse to control the NVR.
Reset : Press and hold the "Reset" button for a few seconds while the NVR
is powered on, and then release.
The NVR will automatically reboot and restore factory settings. The
username and password will be set to the default value, which are “admin
/ (blank)” respectively.
HD-OUT : Connect to your HDTV or computer monitor with HD-OUT port.
IP Camera
NVR
Ethernet Cable
NVR
VGA Cable (not supplied)
A: Connect the NVR to your HDTV
Plug one end in to the HD-OUT socket on the rear of the NVR
and the other in to a spare HD-OUT port on your TV.
Note:
If you have already connected your NVR using HD-OUT you don’t need
to do it again using the VGA port.
NVR
Router
Ethernet Cable
NVR
Power Adapter
2 x 25m (82 ft) Ethernet Cable USB Mouse
2 x 15m (49 ft) Ethernet Cable Power Adapter for NVR
1 x1.5m (5 ft) Ethernet Cable Warranty Card
Quick Setup Guide Quick Operation Guide
HD-OUT Cable
NVR
Mouse
NVR
Please change the password of your Foscam NVR App account,
and NVR and cameras username regularly. The password should
contain a combination of numbers, letters and special characters.
Please keep the username and password of your cameras, NVR
and Foscam NVR App account safe.
Please update your camera to the latest firmware regularly for an
optimal user experience.
8 Channel NVR
Screw Pack
4 x 1080P Bullet IP Cameras
Place the cameras in your preferred locations and use the
included screws to mount them.
For detailed manuals, tools, etc., please visit
foscam.com/tools
If you have problems with your Foscam device, please contact
the reseller you purchased from, or you can e-mail the headquar-
ter technical support team: [e-mail]
Your valuable comments and suggestions on improving Foscam
products are welcomed!
CE Certificate statement Website:
https://www.foscam.com/company/ce-certificate.html
Exporter and Importer Information Opened to Public:
https://www.foscam.com/company/open-information.html
www.foscam.com
As a result of product upgrades and other reasons, this guide may not be able to
update in time, resulting in inconsistent with the official website information,
please take the official website(www.foscam.com) information as the standard.
0~90°
0~360°
0~360°
0~90°
0~360°
0~360°
Product Performance 6
Power Supply: DC 48V 2.0A 96W (NVR)
DC 12V 1.0A 12W (IPC)
Manufacturer: Shenzhen Foscam Intelligent Technology Co., Ltd
Addr: Room 901, Unit B, Building 7, Xingke 1st Street
Vanke Cloud City Phase 1, Nanshan Dist., Shenzhen, 518055, China