User Manual

User’s Manual
16
the fixture.
1 - Set the fixture into blackout (LED on/off).
2 - Adjust auto, strobe & fade speed, sound sensitivity, DMX address, DMX channel, brightness etc.
3 - Run auto mode, use “Speed” button followed by the buttons to adjust auto speeds.
4 – Run sound program, use buttons to adjust sound sensitivity.
5 – Run strobe program, use buttons to adjust strobe speed.
6 – Set auto/fade speed, Press this button followed by buttons to adjust program speed.
7 – Set the fixture into master or slave mode.
8 – Run fade mode. Use “Speed” button followed by buttons to adjust fade speed.
9 - Set DMX address. Press this button followed by to set up DMX address. Press this
button again followed by to select DMX channel.
10 – Set the fixture in full brightness. Press this button followed by buttons to adjust
brightness.
11 – Set the fixture in Economy mode. Press this button followed by buttons to turn
Economy mode on/off.
12 – Set static color. This fixture has RGBA led, so “White” and “UV” buttons are invalid.
7. MAINTENANCE
The operator has to make sure that the safety-related and machine-technical installations are to be
inspected by an expert once a year in the course of an acceptance test.
The operator has to make sure that safety-related and machine-technical installations are to be inspected by
a skilled person once a year.
The following points have to be considered during the inspection:
- Make sure connections are clean and totally dry before linking equipments or supplying electric
power.
- All screws used for installing the fixture or parts of the fixture have to be tightly connected and must
not be corroded.