Instruction Manual
Table Of Contents
- Introduction
- Quick start
- Basic operation
- 2. CALL Button
- 3. Volume Control
- 4. Power LED
- 5. TALK LED
- 6. Call LED
- 7. Headset connector
- 8. Intercom cable connectors
- 9. 3.5mm Headset Connector
- 9. Sidetone adjustment
- Troubleshooting
- Problem: System feedback (Acoustical)
- Specifications
- 2. Headphone Amplifier (From Line to Load)
- 3. Power Requirements
- 4. Environment
- 5. Dimension
IPB Intercom Beltpack
1
Introduction
Thank you for choosing this intercom product. BK-101 is a new design belt pack with plastic
case. It can work with IMS Intercom Master station.
This belt pack adopts wired connection. It has stable and reliable performance, flexible
configuration, full-duplex communication, clear and loud communication sound, easy
operation, and strong noise resistance.
Quick start
1. Connect BK-101 belt pack to a 2-wire intercom main station or belt pack by XLR-3
cable. If belt pack receives DC power, the red Power LED will light.
2. Turn volume control knob to the end by anticlockwise rotation, then plug in the headset.
3. Double click ‘TALK’ button quickly will latch the microphone. The green indicator is ON.
4. Adjust sidetone (Sidetone adjustment is next to the belt-clip) and volume level; make
sure the voice level which you heard from earphone is minimum.
5. Press ‘CALL’ button send a call signal to main station or other belt pack.
6. When the communication is finished, click ‘TALK’ button to turn off the microphone.