User Manual

9 V1.3

www.fos-lighting.eu

Main Menu

Press the MENU button to enter the Main Menu interface.

DMX

Advance

Mode

Dimmer

Addressing

All xtures should be given a DMX starting address when using a DMX signal, so that the correct xture

responds to the correct control signals. This digital starting address is the channel number from which

the xture starts to listen to the digital control information sent out from the DMX controller. The alloca-

tion of this starting address is achieved by setting the correct number on the display located on the base

of the device.

You can set the same starting address for all xtures or a group of xtures, or make different address for

each xture individually.

If you set the same address, all the units will start to listen to the same control signal from the same

channel number. In other words, changing the settings of one channel will affect all the xtures simulta-

neously.

If you set a different address, each unit will start to listen to the channel number you have set, based on

the quantity of control channels of the unit. That means changing the settings of one channel will affect

only the selected xture.

In the case of the FOS Pictor zoom, which is 2/8/12 channels xture. If you set, for example, the address

in the 2 channel mode to channel 3, the device will use the channel 3-4 for control.