User Manual

15 V1.3
www.fos-lighting.eu
Fuse Replacement
This fuse is located in a fuseholder next to the MAINS OUT socket on the connections panel.
To replace a fuse:
1. Disconnect the xture from power and allow it to cool for at least 10 minutes.
2. Unscrew the cap of the fuseholder and remove the fuse. Replace with a fuse of the same size and
rating only.
3. Reinstall the fuseholder cap before reapplying power.
Troubleshooting
Listed below are a few common problems that you may encounter, with solutions.
The xture does not work, no light
• Check the connection of power and main fuse. Be sure the external fuse has not blown.
• Measure the mains voltage on the main connector.
Technical specications
Model FOS Pictor
Power supply: AC100 - 240V, 50/60Hz
Light source: 350W LED
LED color: RGBALC(Red, Green, Blue, Amber, Lime, Cyan)
Color temperature: 2700K - 8000K
Color Rendition: CRI 95(CT channel), 85(full on)
Zoom scale: 18° - 38° manually
Power connection: PowerCON in & out
Fuse: F5A, 250V
Maximum power linking: 6 units
Signal connection: 3-pin +5-pin XLR in & out
DMX channels: 2/8/12 CH
Control mode: RDM, DMX, Rotary
Housing: Colour black, ABS+PC
Size: 745 x 294 x 294mm(29.3 x 11.6 x 11.6in)
Package(carton): 790 x 350 x 360mm(31.1 x 13.8 x 14.2in)
N.W.: 8.7kg(19.2lb)
G.W.: 11.5kg(25.4lb)
Accessories(included): Power lead, Safety rope, Gel frame
Accessories(optional): Gobo holder, Clamp
Enviroment: IP20
Please note: All information is subject to change without prior notice� 13�05�2022