FOS Ribbon Driver User’s Manual
INTRODUCTION Thank you for purchasing this Ribbon Driver 800. The unit is designed for LED strip light. Please read this user manual carefully before use. What is included ▪ 1pc Ribbon Driver 800 ▪ 1pc Power cord ▪ 1pc User Manual Safety Instruction WARNING!!! To reduce the risk of fire, electric shock, or injury to persons, follow these important safety instructions: ▪ This product is intended for indoor use only! ! ▪ Always turn off, unplug power and allow fixture to cool before servicing.
SETUP Mounting Truss/ceiling /wall mounting are available for this small controller. IMPORTANT!!! Safety cables must always be used. The safety cable must be capable of holding 10 times the weight of the fixture. AC Power The fixture is designed to work on 110V/230V 50Hz. Before applying power to a unit, check that the source voltage matches the unit’s requirement. Connection Connect the wires of LED strip to terminator of Ribbon Driver correctly base on color code of wire.
Menu Map ► System Setup [new software] This mode is designed for factory to upload software through USB port. Your product has been tested before shipment. Just check local distributor’s web site if updated software is available. ► System Mode [ xxx ] Press MENU button till display reads “System Mode [XXX]”, then use UP/DOWN button to scroll through” DMX, Slave, Auto, Sound. ► DMX Mode The unit can be operated in 3ch, 4ch or 6ch. Set DMX address according to the DMX mode selected.
Technical Specifications Power Input: AC110V/230V 50-60Hz Output voltage: DC 12V or 24V Load: 200W/port, total 800W max. Fuse: F5A/250V Dimension: 436*235*62 mm Weight: 5.5 kg IMPORTANT INFORMATION! In order to optimize the recovery and recycling of the materials that old appliances contain and reduce the impact on human health and the environment, ensure that this product is recycled at the end of its life.
DMX mode 3: 6 Channels Channel Value Function 1 0-255 Red Intensity 0-100% 2 0-255 Green Intensity 0-100% 3 0-255 Blue Intensity 0-100% 4 0-255 Strobe from slow to fast 5 0-001 002-255 6 0-255 No function Built-in programs Master dimmer 0-100% DMX mode 4: 12 Channels Channel Value Function 1 0-255 Port 1 Red Intensity 0-100% 2 0-255 Port 1 Green Intensity 0100% 3 0-255 Port 1 Blue Intensity 0-100% 10 0-255 Port 4 Red Intensity 0-100% 11 0-255 Port 4 Green Intensity 010
DMX mode 5: 16 channels Channel Value Function 0-152 Port 1 Master dimmer 0100% 152-242 Port 1 Strobe from slow to fast 1 243-255 Port 1 Open 2 0-255 Port 1 Red Intensity 0-100% 3 0-255 Port 1 Green Intensity 0100% 4 0-255 Port 1 Blue Intensity 0100% 0-152 Port 4 Master dimmer 0100% 152-242 Port 4 Strobe from slow to fast 13 243-255 Port 4 Open 14 0-255 Port 4 Red Intensity 0-100% 15 0-255 Port 4 Green Intensity 0100% 16 0-255 Port 4 Blue Intensity 0100%
