Troubleshooting guide

*Y means that this program can be set in this mode.
**There are two kinds of output transformers: ratio of 1:1 and 2:1 respectively. Programmable output function is only
available for the output transformer with a ratio of 1:1.
Note: All parameter settings will be saved only when UPS shuts down normally with internal or external battery
connection. (Normal UPS shutdown means turning off input breaker in bypass/no output mode).
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Output voltage
Output frequency
Voltage range for bypass
Frequency range for bypass
ECO mode enable/disable
Voltage range for ECO mode
ECO mode frequency range setting
Bypass mode setting
Battery backup time setting
Reserved /Programmable output setting**
Reserved /Shutdown point for programmable output**
Hot standby function enable/disable
Battery voltage adjustment
Charger voltage adjustment
Output voltage adjustment
Code Description Bypass
Y
Y
Y
Y
Y
Y
Y
Y
AC
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
ECO
Y
Y
Y
Y
Y
Y
Y
CVCF
Y
Y
Y
Y
Y
Y
Y
Battery
Battery
test
01: Output voltage settings
Interface Setting
Parameter 3: Output voltage
You may choose the following output voltage in parameter 3:
208: The output voltage is 208VAC
220: The output voltage is 220VAC
230: The output voltage is 230VAC
240:The output voltage is 240VAC
List of the 15 programs for parameter 1: