Manualshelf

Troubleshooting guide

ManualsBrandsForza Power Technologies Manualselectrical equipment & suppliesFDC-006K
11121314151617181920
Parallel communication and parallel current connections.
2-6. ForzaTracker monitoring software
3. Advance operation
3-1. Description of buttons and functions
Installation procedure for Windows users:
ForzaTracker is a new generation of UPS monitoring software, which provides user-friendly interface to monitor and control
your Uninterruptible Power System. This unique software provides safe auto-shutdown for multi-computer systems during
power failures. With this software, users can monitor and control any UPS on the same LAN no matter how far they might
be from the UPS.
1. Use the supplied CD or go to the website: http://www.forzaups.com.
2. After clicking the software icon, choose the required operation system.
3. Follow the on-screen instructions to install the software.
4. When you finished downloading all required files, enter the serial No (Installation Password): 5242-87f6-64re-di8d-986u
to install the software (include the hyphens).
5. In order to access as Administrator, input the password: 111296.
6. When your computer restarts, the management software will appear as a light blue round icon located in the system
tray, near the clock.
For Mac users, please refer to the ForzaTracker QIG inside the Mac folder.
* CVCF stands for converter mode.
FunctionButton
ON/Enter
Button
OFF/ESC
Button
Test/Up
Button
Mute/Down
Button
Test/Up +
Mute/Down
Button
Turns on the UPS: Press and hold this button over 0.5 second to turn on the UPS.
Enter Key: Press this button to confirm the selected settings of the configuration menu.
Turns off the UPS: Press and hold this button for 0.5 second to turn off the UPS.
Esc key: Press this button to return to the last setting of the configuration menu.
Battery test: Press and hold this button for 0.5 second to test the battery status while
in AC mode, or CVCF mode.
UP key: Press this button to display the next selection in the configuration menu.
Mutes the alarm: Press and hold the button for 0.5 second to mute the buzzer.
Please refer to sections below for details.
Down key: Press this button to display previous selection in the configuration menu.
Press and hold these two buttons simultaneously for 1 second either to enter
or exit the menu settings.