Product Manual

9000 lbs. Floor Plate Lift IN60001 Rev. C 11/6/2008
16
STEP 19: Do not place any vehicle on the lift at this time. Cycle the lift up and down several
times to insure latches click together and all air is removed from the system. To lower the lift,
both latch releases must be manually released. Latches will automatically reset once the lift
ascends approximately 17” from base. If latches click out of sync, tighten the cable on the one
that clicks first.
STEP 20: With lift fully lowered, recheck power unit fluid level. Fill as required.
OWNER / EMPLOYER RESPONSIBILITIES
The Owner / Employer:
• Shall ensure that lift operators are qualified and that they are trained in the safe use and operation of
the lift using the manufacturer’s operating instructions; ALI/SM01-1, ALI Lifting it Right safety manual;
ALI/ST-90 ALI Safety Tips card; ANSI/ALI ALOIM-2000, American National Standard for Automotive
Lifts-Safety Requirements for Operation, Inspection and Maintenance ; ALI/WL Series, ALI Uniform
Warning Label Decals/Placards ; and in the case of frame engaging lifts, ALI/LP-GUIDE, Vehicle Lifting
Points/Quick Reference Guide for Frame Engaging Lifts .
• Shall establish procedures to periodically inspect the lift in accordance with the lift manufacturer’s
instructions or ANSI/ALI ALOIM-2000, American National Standard for Automotive Lifts-Safety
Requirements for Operation, Inspection and Maintenance ; and The Employer Shall ensure that lift
inspectors are qualified and that they are adequately trained in the inspection of the lift.