Assembly Instruction

⑥
Power On / Off
1. Connect the power adapter with the DC IN port (please make sure you use the original adapter supplied).
You will hear "Power on" from the speaker. The speaker will automatically enter Bluetooth mode as default,
and you will hear "Bluetooth, waiting for connection".
2. Press and hold the [
] button to turn the unit off. You will hear "Power off".
3. Press and hold the [
] button to turn the unit back on.
Bluetooth Connection and Play ( LED indicator: the left LED light )
1. With the power on and the unit in Bluetooth mode, it will automatically switch to pairing state. The blue
LED light will flash slowly. The Bluetooth device name is ‘KBBM Side Table’.
2. A phone or other device can now be paired with the unit.
3. You will hear "Bluetooth is Connected" after pairing. The blue LED light will become constant. If pairing
fails, the blue LED light will flash quickly.
4. During music playback, the music can be paused by short pressing the
【
】
button. It will play again after a
further short press of the
【
】
button.
5. When this unit is connected to a smart phone, press and hold the
【
】
button to switch off the Bluetooth
connection. You will hear "Bluetooth disconnected, waiting for connection".
6. Another device can be connected by repeating paring with Ralph. It is not possible to have two devices
connected simultaneously.
7. The best distance between smart phone and speaker is ≤ 32.8 feet.
Volume control
1. Press the
【
➕
】
button to increase the volume. The speaker will automatically defaults to mid volume when
switched on. You will hear the voice prompt“ Maximum volume”when volume is max. Meanwhile, please
increase the volume of the phone to maximum.
2. Press the
【
➖
】
button to decrease the volume.
Phone calls when connected
1. If you receive a call whilst your Phone is connected via Bluetooth, the speaker will sound your ring tone.
Short press the
【
】
button to answer the phone and speak to the MIC. Short press the
【 】
button again to
hang up, or long press to decline the call.
2. Double press the
【
】
button to redial the phone number of the last call.
Wireless Charging
1. If you have a mobile device with wireless charging capability, it can be charged by placing it on the
wireless charging symbol on the top of the unit.
2. Make sure that the smart phone is within the charging area. Once charging begins, the charging signal will
be show on the phone screen. You can remove your smart phone form the charging area at any time to end
the charging process.
3. The wireless charger will charge compatible mobile devices even when the unit is turned off, providing the