Installation Guide

26
INSPIRE RAILING INSTALLATION
3. Posionbracketcenteredatonboompost&wood 2”x
4”(actual1-1/2”[38mm]x3-1/2”[89mm]).As shown in
Fig.2.
4. Checkendpicketposioningonbothboombrackets.
Pickets SHOULD NOTbeposionedinsidethebracketcup
spacing.AsshowninFig.3&4.
5. Adjusttheunmountedboompost’sposiontoallow
forcorrecontoendpicketposion.AsshowninFig.5.
The post to picket spacing CANNOTexceed4”[102mm].
6. Onceboombracketspacingisconrmed,clampthepanel
ontoboomofbothposts.AsshowninFig.6.
7. Levelthepanelandclampontotopofbothposts.
8. Posiontopbracketontoboompostandconrmpicket
spacingonbothtopbrackets.Besuretohaveboomface
ofpanelushwithinsideboomfaceofbrackets.As
showninFig.7.
9. Oncespacingisconrmed,markboomposthole
locaons.AsshowninFig.8.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Wood 2”x4”
(actual1-1/2”
x 3-1/2”[38mm
x89mm])