Installation Guide

25
INSPIRE RAILING INSTALLATION
Step 5: Top Bracket Installaon Connued
 1. UseSpringPunchtomarktheholes. AsshowninFig.1.
 2. Drilloutholeswitha3/16”[5mm]drillbit. As shown in
  Fig.2.
 3. UseT-25Thread-CungScrewstoreaachthebaseofthe
top rail brackettothepost.
 4. Insertbarrel&screwtore-assemblebracket.
 5. Tightenbarrel&screw.AsshowninFig.3.
Fig. 1 Fig. 2
Fig. 3
BOTTOM POST MOUNTING
Step 1: Mark Boom Post Mounng Locaon
 1. Posionwood 2”x4”(actual1-1/2”[38mm]x3-1/2” 
 [89mm]) between the mounted top post and the
  unmountedboompost.AsshowninFig.1.
 2. Fullyrakeandplacepanelnexttopostsontopofwood 2”
  x4”(actual1-1/2”[38mm]x3-1/2”[89mm]).