Installation Guide

23
INSPIRE RAILING INSTALLATION
Step 3: Boom Bracket Installaon Connued
1. UseSpringPunchtomarktheholes. AsshowninFig.1.
2. Drilloutbracketholeswitha3/16”[5mm]drillbit.As
showninFig.2.
3. UseT-25Thread-CungScrewstoaachthebracketbase.
Beginwithtopholethenboom.AsshowninFig.3.
4. Keepbracketbasecenteredasyouinstallsecondscrew.As
showninFig.4.
5. Insert&ghtenbarrel&screwtore-assemblebracket.As
showninFig.5.
Fig. 1 Fig. 2
Fig. 3
Fig. 4
Fig. 5