Installation Guide

22
INSPIRE RAILING INSTALLATION
Step 2: Boom Bracket Installaon
1. Posionwood 2”x4”(actual1-1/2”[38mm]x3-1/2”
[89mm]) betweenposts.AsshowninFig.1.
2. Posionboomrailbracketscenteredatonpost&
wood 2”x4”(actual1-1/2”[38mm]x3-1/2”
[89mm]).AsshowninFig.2.
3. Usepenciltomarktopedgeofbracketlocaononpost.As
showninFig.3.
4. Dis-assemblethebracketsbyremovingthebarreland
screw.
5. Placebracketbaseonprevioustopedgemark.Centerthe
base on the post and use pencil to add marks for two
screwholelocaons.AsshowninFig.4.
Note:
For best results, be sure bracket bases are centered on
postswhenmakingmarks.
DO NOTmountbracketsintoboompostinthisstep.
Fig. 1 Fig. 2
Fig. 3 Fig. 4