Installation Guide

11
INSPIRE RAILING INSTALLATION
Fig.2Fig.1
Top View
Rail Picket Plug
Step 2: Assemble Panel
 1. Levelpanelshave3SupportPicketswiththreadedends.As
 showninFig.1.
 2. Layallpanelcomponentsonaatsurface.Support Pickets
 arelabeledwithremovablesckers.
 3. PlaceaSupportPicketatbothendsofthepanelandonein
 thecenterofpanel.
 4. FastenSupportPicketstotheboom rail using included
 T-25M6FlatHeadBolt.AsshowninFig.2.
 5. Insertstandardpicketsintoboomrail.AsshowninFig.3.
 6. Installtoprailbystarngatoneendoftherailwitha
  SupportPicket.LooselyfastenoneendSupportPicketwith
included T-25M6FlatHeadBolt.AsshowninFig.4.
 7. Workyourwaydownthetoprailcarefullyinserngall 
 allremainingpicketsintothetoprail.
 8. Whilekeepingpicketsengagedintothetop&boomrails,
  nishghteningboltsintotoprailsupportpickets.
 9. Conrmall6supportscrewsarefullyfastened.
Fig.3
Top View
Top Rail
Boom Rail
Plugwith“B”stamp
forboomrail