Instructions / Assembly

FENCING INSTALLATION: EVOLVER
13
Step 4: Install Rail & Fence Board
 1. SlideBoomRailinto the Post Slots.AsshowninFig.1.
 2. SlideFenceBoardsand/orIntermediateRailoneaerthe 
 other.AsshowninFig.2.
 3. SlidedownTopRail.AsshowninFig.3.
 4. SlideLockingClipintoplacewithsuppliedscrewsand
  fasten.AsshowninFig.4.
 5. SlidePostCapintoplace.AsshowninFig.5.
Note:
• Rubber Mallet can be used to seat Fence Boards,
  Top/Boom/Intermediate Rails & gently knock Post Caps
 downintoplacedown,ifnecessary.
Fig.3 Fig.4
Fig.5
Semi-Privacy Decorave
Portal
Spaces
Created
With
Side Rail
Supports
Intermediate
Rail
Space
Created
With
Side Rail
Support