Instructions / Assembly

FENCING INSTALLATION: EVOLVER

STEP 3.

Slide rail supports into place.

Rail supports are supplied in several lengths, that can be cut to size to accommodate the

changing levels in your terrain, and can even be stacked on top of each other.

No other fastening is needed for these, as the weight of the boards will hold them in place

Installation Guide - 2017 6

RAIL & FENCE BOARD INSTALLATION

Required Components:

 • TopRails

 • BoomRails

• Intermediate Rails

• Side Rail Supports

• Fasteners

• Locking Clips

• Fence Boards

• Post Caps

• Post Cover Sliders

Step 1: Install Side Rail Supports

 1. SlideSideRailSupportsintothePostSlots.

  AsshowninFig.1.

Note:

• Side Rail Supports are supplied in several lengths, that

can be cut to size to accommodate the changing

levels in your terrain, and can even be stacked on

 topofeachother.

 • Nootherfasteningisneeded.

Fig.1

Step2:Install Post Cover Sliders

 1. PlacePostCoverSliders into slots where Fence Boards are

 notneeded.AsshowninFig.1.

Cut Side Rail

SupportToSize

TopView