Instructions / Assembly

Post Installation
The Evolver post is dynamic in its ease of installation, been able to adapt to its surroundings.
Whether you have an existing surface you wish to install on, perhaps in a parking or
pavement, or a brand new home without any existing fencing or boundaries,
Existing Foundation
No foundation
300mm Post mount
600mm Embedded Post mount
STEP 1.
Mount your post (it is important to ensure that it is plumb/at 90 degrees)
If there is an existing foundation, anchor
bolts(M8 size) may be used (please ensure
that they meet local ordinances/building
codes)
Check that the existing foundation is level.
Check that there are no signs of crumbling or
cracking that may later cause problems.
If there is no foundation, a whole may be dug,
and a foot poured (to local ordinance/building
codes)but larger than 250mm. Should the
area be particularly windy, a larger foot may
need to be poured.
Please remember that some boundary lines
may have service lines, electrics and
Installation Guide - 2017 3