Instructions / Assembly

Ancillary items sold separately
45 degree converter
Post Cap
Post Mounts
Intermediate rail
1800mm
1800mm
X 6 or x 1
GENERAL INSTALLATION TIPS
Cutting
As our boards all come pre-cut to exactly the same length each time, installation is increadibly
easy. There may however be a need to cut the various parts especially in the last few fence
boards you lay.
Cutting can easily be accomplished using standard tools.
Composite boards are similar to hardwood and may be cut with a circular saw with a sharp
disk.
Where aluminium is naturally quite soft and can be cut with a hand saw, but it would be easier
to use an electronic item like a circular saw.
Remember… measure twice cut once.
Embedding into cement
When embedding your post mounts, try to avoid any cement/concrete that contain soluble
chlorides or halides. As this may cause problems later with corrosion.
Installation Guide - 2017
17