Manualshelf

User's Manual

ManualsBrandsFortress Technologies ManualsElectronicsThe ES820 is a dual radio access point/bridge. It provides secure connectivity through multiple Ethernet ports and two 802.11 a/b/g radios in a ruggedized enclosure. It provides secure, fixed or mobile communications for harsh environments.
11121314151617181920
Table Of Contents
ES820 Hardware Guide: LEDs and Pushbuttons
8
Radio1
and
Radio2
can exhibit:
solid green - Radio is on.
intermittent green - Radio is passing traffic.
off - Radio is off or Mesh Point’s RF Kill function is enabled.
3.2 Pushbutton Operation
3.2.1 Powering the Mesh Point On and Off
The single front-panel button powers the ES820 Mesh Point
ON and OFF.
If the Mesh Point is off, press the Power button to turn it on.
The
Power LED will slow-flash green while the Mesh Point
boots, then light solid green for normal operation.
or
If the Mesh Point is on, press the Power button to turn it off.
The
Power LED will go dark.
The power button is tied to pin 33 on the Mesh Point’s 37-pin I/
O connector, which is a power control line. Both switches must
be OFF to power the ES820 off.
3.2.2 Pushbutton Rebooting
Reboot (hard boot) the ES820 by powering it off and back on
again (described above).
color behavior
Power Status Enet1/Enet2 Radio1/Radio2
green
solid normal operation - link established radio ON
slow flash booting - - -
intermittent -
cleartext on
encrypted port
passing traffic passing traffic
off powered OFF - -
radio OFF
or
RF Kill enabled